The information in this article applies to:
- Microsoft Windows NT operating system version 3.1
- Microsoft Windows NT Advanced Server version 3.1
- Microsoft Windows NT Workstation version 3.5
- Microsoft Windows NT Server version 3.5
SYMPTOMS
When you install Symantec's PC Anywhere for Windows under Windows NT, PC
Anywhere Setup restarts your computer. After you log on to Windows NT, the
system stops responding (hangs) with a blank screen. To continue, you need
to press CTRL+ALT+DEL for the Windows NT security dialog box to either
Cancel, Logoff or Shutdown the system.
The following error message appears when you log on to Windows NT:
<temp>\INSTBIN.EXE could not be found in the source directory.
where <temp> is the path of the TEMP directory.
You must choose OK which returns you to a screen with a wallpaper
background. To continue, press CTRL+ALT+DEL to display the Windows NT
Security dialog box.
If you copy INSTBIN.EXE file to the TEMP directory, you may receive the
following error message when you log on to Windows NT:
Information File Not Found
This message is accompanied with an OK button. If you select OK, the
Welcome dialog box appears for you to press CTRL+AL+DEL to log on.
CAUSE
Your computer hangs because PC Anywhere Setup replaces the Shell statement
in the Windows NT Registry from PROGMAN.EXE to INSTALL.EXE (PC Anywhere
Setup). Once PC Anywhere Setup starts, INSTALL.EXE is placed in the
%systemroot%\SYSTEM subdirectory.
RESOLUTION
Listed below are possible workarounds to this problem:
- Recovering Windows NT on a FAT File System
- Recovering by Network Access
- Recovering Using Emergency Repair Disk
- Recovering from Another Windows NT Installation
Recovering Windows NT on a FAT File System
- Boot MS-DOS. If MS-DOS is installed, the Windows NT Boot Loader
provides MS-DOS as a selection. If not, use an MS-DOS boot disk.
- Go to the %systemroot%\SYSTEM subdirectory.
- Rename the INSTALL.EXE file to INSTALL.OLD.
- Copy the %systemroot%\SYSTEM32\PROGMAN.EXE file to the
%systemroot%\SYSTEM subdirectory as INSTALL.EXE.
- Restart your computer and select Windows NT.
WARNING: Using Registry Editor incorrectly can cause serious,
system-wide problems that may require you to reinstall Windows NT to
correct them. Microsoft cannot guarantee that any problems resulting
from the use of Registry Editor can be solved. Use this tool at your
own risk.
- Start Registry Editor and locate the following Registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT
\CurrentVersion\Winlogon
Change the Shell value from %systemroot%\SYSTEM\INSTALL.EXE to
PROGMAN.EXE.
- Exit Registry Editor and restart your computer.
- Update the Emergency Repair Disk.
Recovering by Network Access
- Start the computer experiencing the problem, but do not log on.
- Go to another Windows NT computer on the network.
WARNING: Using Registry Editor incorrectly can cause serious,
system-wide problems that may require you to reinstall Windows NT to
correct them. Microsoft cannot guarantee that any problems resulting
from the use of Registry Editor can be solved. Use this tool at your
own risk.
- Start Registry Editor and choose Select Computer from the Registry menu.
- Select the HKEY_LOCAL_MACHINE subtree of the computer that is
experiencing
the problem.
Start Registry Editor and locate the following Registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT
\CurrentVersion\Winlogon
Change the Shell value from %systemroot%\SYSTEM\INSTALL.EXE to
PROGMAN.EXE.
Exit Registry Editor and log on to the computer that experienced the
problem. Immediately after logging on, restart the computer in order for
the changes in the Registry to take effect.
Update the Emergency Repair Disk.
Recovering Using Emergency Repair Disk
NOTE: Any changes after the last update or since the creation of the
Emergency Repair Disk will be lost and must be re-created. If this is
undesirable, you may attempt one of the other three workaround procedures.
Perform the Repair process using the Emergency Repair Disk.
- Restart your computer with the Windows NT version 3.5 setup boot disk.
- At the Welcome To Setup screen press R to repair a damaged Windows
NT version 3.5 installation.
- In the next screen, select the Inspect Registry Files option. Clear the
other options and choose Continue.
- Insert the Emergency Repair Disk when prompted.
- A screen appears for the restoration of Registry files. Select the
"SOFTWARE (Software Information)" option and choose Continue.
Recovering from Another Windows NT Installation
- Install Windows NT to another location on your computer.
- Run Command Prompt and go to the %systemroot%\SYSTEM subdirectory of the
original Windows NT installation experiencing the problem.
- Rename INSTALL.EXE to INSTALL.OLD.
- Copy the %systemroot%\SYSTEM32\PROGMAN.EXE file to the
%systemroot%\SYSTEM subdirectory as INSTALL.EXE.
- Restart the installation of Windows NT where PC Anywhere was installed.
WARNING: Using Registry Editor incorrectly can cause serious,
system-wide problems that may require you to reinstall Windows NT to
correct them. Microsoft cannot guarantee that any problems resulting
from the use of Registry Editor can be solved. Use this tool at your
own risk.
- Start Registry Editor and locate the following Registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT
\CurrentVersion\Winlogon
Change the Shell value from %systemroot%\SYSTEM\INSTALL.EXE to
PROGMAN.EXE.
- Exit Registry Editor and restart your computer.
- Remove the second installation of Windows NT and modify the BOOT.INI
file to reflect the change.
- Update the Emergency Repair Disk.
The PC Anywhere product discussed here is manufactured by Symantec
Corporation, a vendor independent of Microsoft; we make no warranty,
implied or otherwise, regarding this product's performance or reliability.