Err Msg Using NET USE: System Error 1130 Has Occurred

 Last reviewed: September 23, 1996
Article ID: Q124357
The information in this article applies to:
  • Microsoft Windows NT Server version 3.5

SYMPTOMS

When you use the NET USE command to connect to computer running Windows NT, the following error message appears: 

   System Error 1130 has occurred.
   Not enough server storage is available to process this command.
In some cases the following text is written to the Event Viewer system log: 

   The server was unable to perform an operation due to a shortage of
   available resources.

      0000: 000c0000 005c0001 00000000 c00007d1
      0010: 00000000 c000009a 00000000 00000000
      0020: 00000000 00000000 000007d2 0000000b
      0030: 0000003c

RESOLUTION

To correct this problem:

WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.

  1. Run Registry Editor (REGEDT32.EXE).

  2. From the HKEY_LOCAL_MACHINE subtree, go to the following key: 

          \SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters

  3. From the Edit menu, choose Add Value.

  4. Use the following values: 

          Value Name: MinFreeConnections
      Data Type:  REG_DWORD

          Decimal:     5


  5. Close Registry Editor.


  6. Run Control Panel and choose Network.


  7. Under Installed Network Software, highlight Server and then choose
   Configure.


  8. Under Optimization, select Maximize Throughput for File Sharing
   and then choose OK.


  9. Either shutdown and restart Windows NT, or from a command prompt,
   type the following two commands (pressing ENTER after each line):

    

          net stop server
      net start server

    



	
			
	















	






Additional reference words: prodnt 3.50 srv balance

KBCategory: kbnetwork

KBSubcategory: ntnetserv








THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.






	
	Last reviewed:  September 23, 1996
	

	© 1998 Microsoft Corporation. All rights reserved. Terms of Use.