STOP Message Installing Windows NT on NEC Image Computer

 Last reviewed: January 26, 1995
Article ID: Q125358
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5

SYMPTOMS

A STOP message appears when you install Windows NT on an NEC Image computer when Setup attempts to install the KEYBOARD.SYS driver: 

   STOP: 0x0000001E (0xC0000005, 0x00000000, 0x00000000, 0x00000000)
         Kmode_Exception_Not_Handled.

CAUSE

This is due to a problem in the NEC BIOS revision.

RESOLUTION

Obtain a new BIOS revision 1.00.27 from NEC. You can download the update from the NEC BBS at: (508) 635-4706.

Additional reference words: prodnt 3.50
KBCategory: kbsetup
KBSubcategory: nthw ntsetup ntstop

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: January 26, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.