Setting Print Spooler Priority

 Last reviewed: August 23, 1996
Article ID: Q125663
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5

Windows NT 3.5 provides the ability to reduce the priority of the Print Spooler so other processes with higher priorities are able to execute first.

Use the following procedure to change the default priority value of the Windows NT Print Spooler.

WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.

  1. Run Registry Editor.

  2. Select the following key: 

          HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print

  3. Select the PriorityClass value.

  4. From the Edit menu, choose DWord.

  5. Enter a value from 0 to 9.

To set the default priority value, enter 0 (zero). The default priority is 7 on Windows NT Workstation and 9 on Windows NT Server.

A value from 1 to 9 represents the priority of the spooler, with 9 being the highest priority.

KBCategory: kbenv kbprint
KBSubcategory: ntprint ntconfig nthowto
Additional reference words: prodnt 3.50 print manager spoolss winnt

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: August 23, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.