Tandberg 3820 Driver Does Not Support 6150 (150 MB) Tapes

 Last reviewed: March 15, 1995
Article ID: Q127185
The information in this article applies to:
  • Microsoft Windows NT operating system version 3.1
  • Microsoft Windows NT Advanced Server version 3.1
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5

Windows NT Backup cannot write or format a 6150 tape in a Tandberg 3820 tape drive. The Windows NT Tandberg 3820 driver supports only the 6525 (525 MB) tape.

To work around this problem, use the 6525 (525 MB) tape with the Tandberg 3820 tape drive.

KBCategory: kbhw kb3rdparty kbtool
KBSubcategory: ntutil
Additional reference words: 3.10 3.50 prodnt

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 15, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.