Windows NT Hangs During Network File Copy with 3C679

 Last reviewed: June 23, 1995
Article ID: Q128249
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5

SYMPTOMS

When you copy files to a Hewlett-Packard (HP) NetServer computer using a 3Com 3C679 network interface card (NIC) with an 8-bit IBMTOK.SYS driver, Windows NT 3.5 may stop responding (hang) or the copied files may become corrupted. The NIC is not on the Windows NT 3.5 Hardware Compatibility List (HCL).

WORKAROUND

To work around this problem, run the EISA Configuration utility for the computer and set the NIC data path width value to 8 bits. The default value is 32 bits.

The products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

KBCategory: kb3rdparty kbnetwork
KBSubcategory: nthw
Additional reference words: prodnt 3.50 hp mac

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: June 23, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.