NE3200 not reset properly on warm boot

 Last reviewed: June 30, 1995
Article ID: Q132108
The information in this article applies to:
  • Microsoft Windows NT operating system version 3.1
  • Microsoft Windows NT Advanced Server version 3.1
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5

SYMPTOMS

When you make a change to your Windows NT configuration (for example, remove a network protocol) and choose the Restart Now button, the computer hangs at the initialization screen.

WORKAROUND

To work around this problem, turn the machine off or press the reset button.

STATUS

Microsoft has confirmed this to be a problem in Windows NT version 3.1 and 3.5. This problem was corrected in Windows NT version 3.51.

KBCategory: kbenv kbbug3.10 kbbug3.50 kbfix3.51
KBSubcategory: ntdriver
Additional reference words: prodnt 3.10 3.50

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: June 30, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.