Duplicate Name Errors When Using Synoptics Hubs and DHCP

 Last reviewed: December 18, 1997
Article ID: Q136568
The information in this article applies to:
  • Microsoft Windows NT Workstation versions 3.5, 3.51, and 4.0
  • Microsoft Windows NT Server versions 3.5, 3.51, and 4.0

SYMPTOMS

You may experience duplicate name errors and have problems obtaining IP addresses from Dynamic Host Configuration Protocol (DHCP) servers if you have Synoptics hubs on the network.

CAUSE

Synoptics hubs can be configured to use BOOTP to communicate configuration information. The BOOTP broadcasts made by the hubs and the server used to configure the hubs interfere with Windows NT DHCP. These hubs can lease IP addresses from the DHCP server causing duplicate name errors and preventing clients from obtaining addresses. The event log on the DHCP server may also show the following error: 

   Event ID: 1011
   Source: DHCP Server
   Description: The DHCP Server issues a NACK to the client (MAC address)
   for the address (IP address) request.
If a Synoptics hub is causing the error, the MAC address in the above error will be unusually long, for example: 

   003C5DC601534D526F73736932
The MAC address in the error message above usually contains 22 digits, not 26 digits. For example, if you have 0018399D0100AA00A3F079, the first four hexadecimal numbers are the subnet address that the DHCP packet originates on. When you convert "00 18 39 9d" to decimal and invert it, the result is 157.57.24.0. The last twelve digits are the MAC address (00AA00A3F079).

RESOLUTION

To work around this problem, disable the BOOTP functionality on the Synoptics hubs and configuration servers and use the TFTP functionality instead.

To correct this problem, contact Bay Networks Technical Support at (800) 252-6926 to obtain a firmware fix.

Additional query words: prodnt lease router hub dhcpnack
Keywords : NTPROTOCOL NTSrvWkst kb3rdparty kbnetwork
Version : 3.5 3.51 4.0
Platform : winnt

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: December 18, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.