How To Promote BDC to PDC Through RAS

Last reviewed: August 23, 1996
Article ID: Q139343
The information in this article applies to:
  • Microsoft Windows NT Server versions 3.5 and 3.51

A Backup Domain Controller (BDC) can be connected to a remote domain using Windows NT Server Remote Access Service (RAS). To promote a BDC that is connected through RAS to a primary domain controller (PDC):

  1. Configure the BDC as a Dial-out-only RAS client. The Remote Access Server service should not be running on this BDC. By having just the RAS client dial out services on this BDC, it can function as a PDC because that functionality does not depend on Netlogon.

  2. If you promote the RAS-connected client, Netlogon stops, changes roles and restarts. RAS is dependent on Netlogon, so when Netlogon stops, the connection is lost.

  3. A RAS-connected BDC that has been promoted to PDC functions as it should, but possibly with slower response time, depending on line speed.


KBCategory: kbnetwork
KBSubcategory: nthowto ntras
Additional reference words: prodnt 3.50 3.51


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: August 23, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.