IBM Token Ring 16/4 Network Adapter II Switch Settings

• Microsoft Windows NT Workstation versions 3.5 and 3.51
• Microsoft Windows NT Server versions 3.5 and 3.51

SUMMARY

The following lists switch settings for the IBM Token Ring 16/4 Adapter II ISA network adapter:

ROM ADDRESS (SW1-SW3):

SW1   SW2   SW3   RPL ROM ADDRESS   I/O BASE ADDRESS
---   ---   ---   ---------------   ----------------
ON    ON    ON        C0000             86A0
OFF   ON    ON        C4000             96A0
ON    OFF   ON        C8000             A6A0
OFF   OFF   ON        CC000             B6A0
ON    ON    OFF       D0000             C6A0
OFF   ON    OFF       D4000             D6A0
ON    OFF   OFF       D8000             E6A0
OFF   OFF   OFF       DC000             F6A0

SW4   SW5   Interrupt Requests (IRQ)
---   ---   ------------------------
ON    ON        IRQ  9
OFF   ON        IRQ 10
ON    OFF       IRQ 11
OFF   OFF       IRQ 15

SW6 State --- ----- ON Normal OFF Fast

ADAPTER MODE (SW7):

SW7 Mode --- ---- ON Normal OFF Reserved

RPL (SW8):

SW8 Enable/Disable --- -------------- ON RPL DISABLE OFF RPL ENABLE

DMA CHANNEL (SW9-SW10):

SW9   SW10   Channel
---   ----   -------
ON    ON       5
OFF   ON       6
ON    OFF      7
OFF   OFF    Not Used

SW11 Speed ---- ----- ON 4 Mbps OFF 16 Mbps

CABLE TYPE (SW12):

SW12 Type ---- ---- ON STP OFF UTP

For additional information on the IBM Token Ring 16/4 Adapter II network adapter, refer to the Installation and Test Instructions guide provided with the network adapter.