Configure Win95 & WinNT Logon to NetWare Server w/ NT RAS Server

Last reviewed: September 9, 1997
Article ID: Q151995
3.51 95 WINDOWS kbsetup

The information in this article applies to:

  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Server version 3.51
  • Microsoft Windows 95

SUMMARY

You can use the Windows NT remote access service (RAS) functionality to allow Windows 95 NetWare clients or Windows NT NetWare clients to dial into the Windows NT 3.51 RAS Server; these clients can then log on to a Novell NetWare server.

MORE INFORMATION

The following are steps to provide the Windows 95 or Windows NT client that connects to a Windows NT 3.51 Server access to the Novell 3.x or 4.1 file server.

  1. Have Windows NT 3.51 Server running RAS Services.

  2. Make sure that NWLink IPX/SPX Compatible Transport is loaded on the Windows NT Server and make sure that the frame type is set to match the frame type used by IPX/SPX on your NetWare server (for example 802.3, 802.2,and so forth). You can leave the Internal Network Number blank or set it to 00000000.

  3. On the RAS Server, use RAS Admin to add the user name that will be dialing in (it is the same as the NetWare Server's user name.)

  4. Allow IPX users to route to Entire Network.

  5. Any authentication should work when tested with encrypted authentication and clear text options.

  6. On the Win95 Client PC, load the Microsoft Client for NetWare and the IPX/SPX Protocol. The Microsoft client for Microsoft Networks will not allow the client to see NetWare servers. The Windows 95 client should load Microsoft Client for NetWare Networkds.

NOTE: Windows NT Workstation or Windows NT Server should be running Client Services for NetWare(CSNW) or Gateway Services for NetWare (GSNW).

  1. You should select the Client for NetWare Networks loaded as primary Network Logon. This will not allow the client to process the Login Script Processing, because it will be done automatically after connecting by means of RAS.

  2. Create a dial-up connection to the RAS Server from the Windows 95 computer.

NOTE: At this point you may receive the following message:

   You are currently using NetWare Servers which will be inaccessible if
   you establish this connection. Click OK to continue dialing or cancel to
   stop.

This message is advisory in nature. It informs you that NetWare servers that are local as opposed to RAS connection may not be accessible. This message is only seen on Windows 95 clients.

Once logged on, you should see the Logon Window for NetWare. If you don't, double-click on the Network Neighborhood icon to get to the Novell Server or Directory Tree.


KBCategory: kbsetup
KBSubcategory: ntras ntsrvwkst
Additional reference words: win95 prodnt 3.51
Keywords : NTRAS NTSrvWkst kbsetup
Version : 3.51 95
Platform : WINDOWS


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: September 9, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.