FPNW Login.exe Does Not Set Machine Name CorrectlyLast reviewed: September 7, 1996Article ID: Q154635 |
The information in this article applies to:
SYMPTOMSNovell NetWare login scripts may contain a command called 'MACHINE NAME='. FPNW supports this command; however, the syntax is 'MACHINE='. This command sets the NetBIOS machine name of the computer; it is not an environmental variable. Applications can query this value to determine the machine's name. Applications that are designed to read the machine name that has been set from a NetWare server using 'MACHINE NAME=' may not work with FPNW using 'MACHINE='.
CAUSEThe value set by the 'MACHINE NAME=' command should be a NetBIOS name. NetBIOS names are 16 bytes long, padded with spaces, and (in the MS-DOS environment) zero terminated. The Novell Login.exe does not pad the name with spaces; the FPNW Login.exe does. For example:
NetWare Login.exe
MACHINE NAME = "SERVER" Value set to: SERVER<end> FPNW Login.exe
MACHINE = "SERVER" Value set to: SERVER <end> RESOLUTIONAlthough the FPNW Login.exe sets the NetBIOS name according to specification, Microsoft has changed Login.exe to set the machine name in the same manner as the NetWare Login.exe.
STATUSMicrosoft has confirmed this to be a problem in Windows NT version 3.51 with File and Print Services for NetWare. This problem was corrected in the latest Windows NT 3.51 U.S. Service Pack. For information on obtaining the Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces):
S E R V P A C K |
KBCategory: kb3rdparty kbnetwork
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |