Computer Hangs During Setup with Intel EtherExpress PRO/100A

 Last reviewed: August 13, 1997
Article ID: Q154640
The information in this article applies to:
  • Microsoft Windows NT Server version 4.0
  • Microsoft Windows NT Workstation version 4.0

SYMPTOMS

During Setup on a computer equipped with an Intel EtherExpress PRO/100A network adapter, the computer may stop responding (hang) when the network is being started.

CAUSE

The Intel EtherExpress PRO/100 EISA and PCI cards are not supported in Windows NT version 4.0.

RESOLUTION

The Intel EtherExpress PRO/100B network adapter is supported by Windows NT 4.0. The driver is included in the Drvlib\Netcard\X86\E100b folder on the Windows NT 4.0 CD-ROM.

Additional query words: access violation
Keywords : ntdriver nthw NTSrvWkst kbhw kbsetup
Version : 4.0
Platform : winnt

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: August 13, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.