Sanyo 3-CD-ROM Changer Not Recognized by Windows NT 4.0

Last reviewed: March 27, 1997
Article ID: Q154920

The information in this article applies to:

Microsoft Windows NT Server version 4.0
Microsoft Windows NT Workstation version 4.0

SYMPTOMS

When you start a computer with a Sanyo 3-CD-ROM changer, the device may not be recognized by Windows NT 4.0.

CAUSE

This behavior can occur if the device has an older firmware revision that does not work with Windows NT 4.0 reliably.

RESOLUTION

Upgrade the firmware on the Sanyo 3-CD-ROM changer to version 2.13 or later.

MORE INFORMATION

This CD-ROM Changer is on the Windows NT 4.0 Hardware Compatibility List under the name "Torisan (Sanyo) CDR-C3G Changer."

Additional query words: quad speed 4x
Keywords : kb3rdparty kbhw nthw NTSrvWkst prodnt
Version : 4.0
Platform : WinNT

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 27, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.