STOP 0X7B Inaccessible Boot Device When Starting Windows NT

Last reviewed: October 22, 1997
Article ID: Q156833
The information in this article applies to:
  • Microsoft Windows NT Server version 4.0
  • Microsoft Windows NT Workstation version 4.0

SYMPTOMS

You have a NEC Versa 4000 computer with the following configuration:

  • IDE controller-1: IDE hard drive (master) and IDE hard drive (slave)
  • IDE controller-2: IDE CD-ROM drive (master/standalone)

When you add the third IDE hard drive as master on the second channel and reconfigure the CD-ROM drive to be a slave, the following error message will be displayed:

   STOP 0x0000007B Inaccessible Boot device

The same problem will be noticed with similarly configured systems using combination IDE disk and IDE CD-ROM drive peripheral devices.

CAUSE

This problem is caused by the Atapi.sys driver not functioning properly in this configuration.

WORKAROUND

To work around this problem, replace the Atapi.sys driver found in the %SystemRoot%\System32\Drivers directory with the Atapi.sys driver from Windows NT 3.51 Service Pack 5.

STATUS

Microsoft has confirmed this to be a problem in Windows NT version 4.0. A supported fix is now available, but has not been fully regression tested and should be applied only to systems experiencing this specific problem. Unless you are severely impacted by this specific problem, Microsoft recommends that you wait for the next Service Pack that contains this fix. Contact Microsoft Technical Support for more information.


Additional query words: ghost
Keywords : kbbug4.00 ntdriver ntsetup NTSrvWkst kbsetup
Version : WinNT:4.0
Platform : winnt


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: October 22, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.