Multiprocessor failure with Adaptec 2940

 Last reviewed: March 28, 1997
Article ID: Q158315
The information in this article applies to:
  • Microsoft Windows NT Workstation versions 3.5, 3.51, and 4.00
  • Microsoft Windows NT Server versions 3.5, 3.51, and 4.00

SUMMARY

If you attempt to use multiple processors with Microsoft Windows NT, the extra processors may not be recognized if you use an Adaptec AHA-2940 with BIOS version 1.21.

MORE INFORMATION

The BIOS version 1.21 for the AHA-2940 contains an incompatibility with some multiprocessor systems. The problem may be resolved by updating to version 1.23.

If you need further information, you may reach Adaptec Technical Support at (800) 959-7274.

The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Additional query words: prodnt setup adaptec
Keywords : kbsetup ntsetup
Version : 3.5 3.51 4.0
Platform : WinNT

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 28, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.