Sony Spressa SCSI CD-ROM Drive May Not Be Detected

 Last reviewed: March 19, 1997
Article ID: Q164434
The information in this article applies to:
  • Microsoft Windows NT Server version 4.0
  • Microsoft Windows NT Workstation version 4.0

SYMPTOMS

Windows NT Setup may not detect the Sony Spressa CDU-920S SCSI CD-ROM drive.

CAUSE

The Sony Spressa CDU-920S is shipped with the Parity, ID1, ID2, and Prevent/Allow settings preset to On. Note that the Parity jumper is also known as the Device Type jumper.

RESOLUTION

Remove the Parity/Device Type jumper. Note also that the firmware version must be 2.0B.

For information about removing jumpers or determining the firmware version, contact Sony Corporation.

Additional query words: spresa
Keywords : kbhw kbsetup ntboot ntdriver nthw
Version : 4.0
Platform : WinNT

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 19, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.