WD97: How to Clear the Undo Stack

Last reviewed: February 16, 1998
Article ID: Q181172
The information in this article applies to:
  • Microsoft Word 97 for Windows

SUMMARY

This article contains several methods for clearing the Undo stack in Word.

MORE INFORMATION

By design, you cannot turn off the Undo or Redo commands, nor can you change the maximum number of actions Word stores in the Undo or Redo stacks (up to approximately 100 or the total number of actions in one document).

NOTE: If you are experiencing out-of-memory or slow-performance problems, be sure to rule out other Word or system operations as the cause.

To clear the Undo and Redo stacks in Word, use any of the following methods.

Method 1: Protect the Document for Forms

  1. On the Tools menu, click Protect Document.

  2. Under Protect Document For, click Forms.

  3. Click OK.

NOTE: If you do not actually want to protect your document, click Unprotect Document on the Tools menu.

Method 2: Create and Use a Macro

Microsoft provides programming examples for illustration only, without warranty either expressed or implied, including, but not limited to, the implied warranties of merchantability and/or fitness for a particular purpose. This article assumes that you are familiar with the programming language being demonstrated and the tools used to create and debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific needs. If you have limited programming experience, you may want to contact the Microsoft fee-based consulting line at (800) 936-5200. For more information about the support options available from Microsoft, please see the following page on the World Wide Web:

   http://www.microsoft.com/support/supportnet/refguide/default.asp

The following sample Visual Basic for Applications macro clears the undo stack for the active document.

   Sub ClearActiveDocumentUndoStack()
      ActiveDocument.UndoClear
   End Sub

The following sample Visual Basic for Applications macro clears the undo stack for all open documents.

   Sub ClearAllDocumentsUndoStack()
      Dim oDocUndoStack as Object
      For Each oDocUndoStack In Application.Documents
         oDocUndoStack.UndoClear
      Next oDocUndoStack
   End Sub

For additional information, please see the following article in the Microsoft Knowledge Base:

   ARTICLE-ID: Q173707
   TITLE     : OFF97: How to Run Sample Code from Knowledge Base Articles


Additional query words: slow slows uses up depleted depletes exhausted
exhausts low memory oom insufficient enough out nukes nuked erase erases
deletes delete remove removes vb vba vbe
Keywords : kbmacroexample word97 kbdta
Version : WINDOWS:97
Platform : WINDOWS
Issue type : kbhowto


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: February 16, 1998
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.