MCI_RESUME

The MCI_RESUME command causes a paused device to resume the paused operation. Digital-video, VCR, and waveform-audio devices recognize this command. Although CD audio, MIDI sequencer, and videodisc devices also recognize this command, the MCICDA, MCISEQ, and MCIPIONR device drivers do not support it.

MCIERROR mciSendCommand(MCIDEVICEID wDeviceID, MCI_RESUME, 
    DWORD dwFlags, (DWORD) (LPMCI_GENERIC_PARMS) lpResume);
 

Parameters

wDeviceID

Device identifier of the MCI device that is to receive the command message.

dwFlags

MCI_NOTIFY, MCI_WAIT, or, for digital-video and VCR devices, MCI_TEST. For information about these flags, see The Wait, Notify, and Test Flags.

lpResume

Address of an MCI_GENERIC_PARMS structure. (Devices with extended command sets might replace this structure with a device-specific structure.)

Return Values

Returns zero if successful or an error otherwise.

Remarks

This command resumes playing and recording without changing the current track position set with MCI_PLAY or MCI_RECORD.

QuickInfo

  Windows NT: Requires version 3.1 or later.
  Windows: Requires Windows 95 or later.
  Windows CE: Unsupported.
  Header: Declared in mmsystem.h.

See Also

MCI Overview, MCI Commands, MCI_GENERIC_PARMS, MCI_PLAY, MCI_RECORD