waveOutOpen

The waveOutOpen function opens the given waveform-audio output device for playback.

MMRESULT waveOutOpen(
  LPHWAVEOUT phwo,           
  UINT uDeviceID,            
  LPWAVEFORMATEX pwfx,       
  DWORD dwCallback,          
  DWORD dwCallbackInstance,  
  DWORD fdwOpen              
);
 

Parameters

phwo
Address filled with a handle identifying the open waveform-audio output device. Use the handle to identify the device when calling other waveform-audio output functions. This parameter might be NULL if the WAVE_FORMAT_QUERY flag is specified for fdwOpen.
uDeviceID
Identifier of the waveform-audio output device to open. It can be either a device identifier or a handle of an open waveform-audio input device.You can use the following flag instead of a device identifier:
WAVE_MAPPER
The function selects a waveform-audio output device capable of playing the given format.
pwfx
Address of a WAVEFORMATEX structure that identifies the format of the waveform-audio data to be sent to the device. You can free this structure immediately after passing it to waveOutOpen.
dwCallback
Address of a fixed callback function, an event handle, a handle to a window, or the identifier of a thread to be called during waveform-audio playback to process messages related to the progress of the playback. If no callback function is required, this value can be zero. For more information on the callback function, see waveOutProc.
dwCallbackInstance
User-instance data passed to the callback mechanism. This parameter is not used with the window callback mechanism.
fdwOpen
Flags for opening the device. The following values are defined:
CALLBACK_EVENT
The dwCallback parameter is an event handle.
CALLBACK_FUNCTION
The dwCallback parameter is a callback procedure address.
CALLBACK_NULL
No callback mechanism. This is the default setting.
CALLBACK_THREAD
The dwCallback parameter is a thread identifier.
CALLBACK_WINDOW
The dwCallback parameter is a window handle.
WAVE_ALLOWSYNC
If this flag is specified, a synchronous waveform-audio device can be opened. If this flag is not specified while opening a synchronous driver, the device will fail to open.
WAVE_FORMAT_DIRECT
If this flag is specified, the ACM driver does not perform conversions on the audio data.
WAVE_FORMAT_QUERY
If this flag is specified, waveOutOpen queries the device to determine if it supports the given format, but the device is not actually opened.
WAVE_MAPPED
If this flag is specified, the uDeviceID parameter specifies a waveform-audio device to be mapped to by the wave mapper.

Return Values

Returns MMSYSERR_NOERROR if successful or an error otherwise. Possible error values include the following:

Value Description
MMSYSERR_ALLOCATED Specified resource is already allocated.
MMSYSERR_BADDEVICEID Specified device identifier is out of range.
MMSYSERR_NODRIVER No device driver is present.
MMSYSERR_NOMEM Unable to allocate or lock memory.
WAVERR_BADFORMAT Attempted to open with an unsupported waveform-audio format.
WAVERR_SYNC The device is synchronous but waveOutOpen was called without using the WAVE_ALLOWSYNC flag.

Remarks

Use the waveOutGetNumDevs function to determine the number of waveform-audio output devices present in the system. If the value specified by the uDeviceID parameter is a device identifier, it can vary from zero to one less than the number of devices present. The WAVE_MAPPER constant can also be used as a device identifier.

The structure pointed to by pwfx can be extended to include type-specific information for certain data formats. For example, for PCM data, an extra UINT is added to specify the number of bits per sample. Use the PCMWAVEFORMAT structure in this case. For all other waveform-audio formats, use the WAVEFORMATEX structure to specify the length of the additional data.

If you choose to have a window or thread receive callback information, the following messages are sent to the window procedure function to indicate the progress of waveform-audio output: MM_WOM_OPEN, MM_WOM_CLOSE, and MM_WOM_DONE.

If you choose to have a function receive callback information, the following messages are sent to the function to indicate the progress of waveform-audio output: WOM_OPEN, WOM_CLOSE, and WOM_DONE.

QuickInfo

  Windows NT: Requires version 3.1 or later.
  Windows: Requires Windows 95 or later.
  Windows CE: Requires version 2.0 or later.
  Header: Declared in mmsystem.h.
  Import Library: Use winmm.lib.

See Also

Waveform Audio Overview, Waveform Functions, WAVEFORMATEX, waveOutGetNumDevs, waveOutProc, PCMWAVEFORMAT, MM_WOM_OPEN, MM_WOM_CLOSE, MM_WOM_DONE