6.4.2. Default SCSI ID's
It is important for SCAM devices to have a default ID setting in case they are used on a SCSI bus that does not use a SCAM master host adapter. Therefore, default IDs listed in table 1 are recommended settings for all PnP SCSI devices as shipped from the factory. Provision may be given to the user to change the default ID to control configuration.
Table 1 - As shipped default SCSI ID assignment
| SCSI ID | SCSI Default ID |
| 7 | Host Adapter |
| 6 | Magnetic Disk Drive |
| 5 | |
| 4 | Tape or R/W Optical |
| 3 | CD-ROM |
| 2 | Scanner/Printer |
| 1 | |
| 0 | |
SCSI IDs 5, 1, and 0, are used during system configuration for additional devices.