LINETRANSLATERESULT_ Constants

The LINETRANSLATERESULT_ bit-flag constants describe various results of an address translation.

LINETRANSLATERESULT_CANONICAL

Indicates that the input string was in valid canonical format.

LINETRANSLATERESULT_INTERNATIONAL

Indicates that the call is being treated as an international call (country code specified in the destination address is different from the country code specified for the CurrentLocation).

LINETRANSLATERESULT_LONGDISTANCE

Indicates that the call is being treated as a long distance call (country code specified in the destination address is the same but area code is different from those specified for the CurrentLocation).

LINETRANSLATERESULT_LOCAL

Indicates that the call is being treated as a local call (country code and area code specified in the destination address are the same as those specified for the CurrentLocation).

LINETRANSLATERESULT_INTOLLLIST

Indicates that the local call is being dialed as long distance because the country has toll calling and the prefix appears in the TollPrefixList of the CurrentLocation.

LINETRANSLATERESULT_NOTINTOLLLIST

Indicates that the country supports toll calling but the prefix does not appear in the TollPrefixList, so the call is dialed as a local call. Note that if both INTOLLIST and NOTINTOLLIST are off, the current country does not support toll prefixes, and user-interface elements related to toll prefixes should not be presented to the user; if either such bit is on, the country does support toll lists, and the related user-interface elements should be enabled.

LINETRANSLATERESULT_DIALBILLING

Indicates that the returned address contains a "$".

LINETRANSLATERESULT_DIALQUIET

Indicates that the returned address contain a "@".

LINETRANSLATERESULT_DIALDIALTONE

Indicates that the returned address contains a "W".

LINETRANSLATERESULT_DIALPROMPT

Indicates that the returned address contains a "?".

LINETRANSLATERESULT_VOICEDETECT

Indicates that the returned dialable address contains a ":".

Note  The ":" (colon) character will be added to the list of characters which can be embedded in a dialable string and passed into destination addresses. Attempting to pass it from an application to a line device that supports an API version earlier than 2.0 will most likely result in LINEERR_INVALADDRESS, or possibly in the character being ignored entirely. The meaning of this character is "Pause until a voice prompt is detected, then continue dialing"; it is intended for use when automatically dialing into systems that give voice prompts, such as long distance calling card processors.

No extensibility. All 32 bits are reserved.