The ADAPTER_STATUS structure contains information about a network adapter. This structure is pointed to by the ncb_buffer member of the NCB structure. ADAPTER_STATUS is followed by as many NAME_BUFFER structures as required to describe the network adapters on the system.
typedef struct _ADAPTER_STATUS { // adptst
UCHAR adapter_address[6];
UCHAR rev_major;
UCHAR reserved0;
UCHAR adapter_type;
UCHAR rev_minor;
WORD duration;
WORD frmr_recv;
WORD frmr_xmit;
WORD iframe_recv_err;
WORD xmit_aborts;
DWORD xmit_success;
DWORD recv_success;
WORD iframe_xmit_err;
WORD recv_buff_unavail;
WORD t1_timeouts;
WORD ti_timeouts;
DWORD reserved1;
WORD free_ncbs;
WORD max_cfg_ncbs;
WORD max_ncbs;
WORD xmit_buf_unavail;
WORD max_dgram_size;
WORD pending_sess;
WORD max_cfg_sess;
WORD max_sess;
WORD max_sess_pkt_size;
WORD name_count;
} ADAPTER_STATUS;
Members
adapter_address
Specifies encoded address of the adapter.
rev_major
Specifies the major software-release level. This value is 3 for IBM NetBIOS 3. x.
reserved0
Reserved. This value is always zero.
adapter_type
Specifies the adapter type. This value is 0xFF for a Token Ring adapter or 0xFE for an Ethernet adapter.
rev_minor
Specifies the minor software-release level. This value is zero for IBM NetBIOS x.0.
duration
Specifies the duration of the reporting period, in minutes.
frmr_recv
Specifies the number of FRMR frames received.
frmr_xmit
Specifies the number of FRMR frames transmitted.
iframe_recv_err
Specifies the number of I frames received in error.
xmit_aborts
Specifies the number of aborted transmissions.
xmit_success
Specifies the number of successfully transmitted packets.
recv_success
Specifies the number of successfully received packets.
iframe_xmit_err
Specifies the number of I frames transmitted in error.
recv_buff_unavail
Specifies the number of times a buffer was not available to service a request from a remote computer.
t1_timeouts
Specifies the number of times that the DLC T1 timer timed out.
ti_timeouts
Specifies the number of times that the ti inactivity timer timed out.The ti timer is used to detect links that have been broken.
reserved1
Reserved. This value is always zero.
free_ncbs
Specifies the current number of free network control blocks.
max_cfg_ncbs
Undefined for IBM NetBIOS 3.0.
max_ncbs
Undefined for IBM NetBIOS 3.0.
xmit_buf_unavail
Undefined for IBM NetBIOS 3.0.
max_dgram_size
Specifies the maximum size of a datagram packet. This value is always at least 512 bytes.
pending_sess
Specifies the number of pending sessions.
max_cfg_sess
Specifies the configured maximum pending sessions.
max_sess
Undefined for IBM NetBIOS 3.0.
max_sess_pkt_size
Specifies the maximum size of a session data packet.
name_count
Specifies the number of names in the local names table.
See Also