The SetMapMode function sets the mapping mode of the specified device context. The mapping mode defines the unit of measure used to transform page-space units into device-space units, and also defines the orientation of the device's x and y axes.
int SetMapMode(
| HDC hdc, | // handle of device context |
| int fnMapMode | // new mapping mode |
| ); |
Parameters
hdc
Identifies the device context.
fnMapMode
Specifies the new mapping mode. It can be any one of the following values:
| Value | Description |
| MM_ANISOTROPIC | Logical units are mapped to arbitrary units with arbitrarily scaled axes. Use the SetWindowExtEx and SetViewportExtEx functions to specify the units, orientation, and scaling that you want. |
| MM_HIENGLISH | Each logical unit is mapped to 0.001 inch. Positive x is to the right; positive y is up. |
| MM_HIMETRIC | Each logical unit is mapped to 0.01 millimeter. Positive x is to the right; positive y is up. |
| MM_ISOTROPIC | Logical units are mapped to arbitrary units with equally scaled axes; that is, one unit along the x-axis is equal to one unit along the y-axis. Use the SetWindowExtEx and SetViewportExtEx functions to specify the units and the orientation of the axes that you want. Graphics device interface (GDI) makes adjustments as necessary to ensure the x and y units remain the same size (for example, if you set the window extent, the viewport will be adjusted to keep the units isotropic). |
| MM_LOENGLISH | Each logical unit is mapped to 0.01 inch. Positive x is to the right; positive y is up. |
| MM_LOMETRIC | Each logical unit is mapped to 0.1 millimeter. Positive x is to the right; positive y is up. |
| MM_TEXT | Each logical unit is mapped to one device pixel. Positive x is to the right; positive y is down. |
| MM_TWIPS | Each logical unit is mapped to one twentieth of a printer's point (1/1440 inch, also called a "twip"). Positive x is to the right; positive y is up. |
Return Values
If the function succeeds, the return value identifies the previous mapping mode.
If the function fails, the return value is zero.
Remarks
The MM_TEXT mode allows applications to work in device pixels, whose size varies from device to device.
The MM_HIENGLISH, MM_HIMETRIC, MM_LOENGLISH, MM_LOMETRIC, and MM_TWIPS modes are useful for applications drawing in physically meaningful units (such as inches or millimeters).
The MM_ISOTROPIC mode ensures a 1:1 aspect ratio.
The MM_ANISOTROPIC mode allows the x-coordinates and y-coordinates to be adjusted independently.
See Also
GetMapMode, SetViewportExtEx, SetViewportOrgEx, SetWindowExtEx, SetWindowOrgEx