CryptAcquireContext

[New - Windows NT]

[New - Windows 95, OEM Service Release 2]

The CryptAcquireContext function is used to acquire a handle to a particular key container within a particular CSP. This returned handle can then be used to make calls to the selected CSP.

This function performs two operations. It first attempts to find a CSP with the characteristics described in the dwProvType and pszProvider parameters. If the CSP is found, then the function attempts to find a key container within the CSP matching the name specified by the pszContainer parameter.

This function can also be used to create and destroy key containers, depending on the value of the dwFlags parameter.

BOOL CRYPTFUNC CryptAcquireContext(

HCRYPTPROV *phProv,  
LPCTSTR pszContainer,  
LPCTSTR pszProvider,  
DWORD dwProvType,  
DWORD dwFlags  
);  

Parameters

phProv

[out] The address to which the function copies a handle to the CSP.

pszContainer

[in] The key container name. This is a zero-terminated string that identifies the key container to the CSP. This name is independent of the method used to store the keys. Some CSPs will store their key containers internally (in hardware), some will use the system Registry, and others will use the file system.

If this parameter is NULL, then a default key container name will be used. For example, if the Microsoft RSA Base Provider is being used, then the current user's logon name will be used as the name of the key container. Other CSPs may also have default key containers that can be acquired in this way.

An application can obtain the name of the acquired key container at a later time by reading the PP_CONTAINER parameter from the CryptGetProvParam function.

pszProvider

[in] The provider name. This is a zero-terminated string that specifies the CSP to be used.

If this parameter is NULL then the user default provider is used. This situation is discussed in detail in the section Interfacing with a Cryptographic Service Provider (CSP).

An application can obtain the name of the acquired CSP at a later time by reading the PP_NAME parameter from the CryptGetProvParam function.

dwProvType

[in] The type of provider to acquire. The following provider types are predefined. These are discussed in detail in the section Interfacing with a Cryptographic Service Provider (CSP).

感ROV_RSA_FULL

感ROV_RSA_SIG

感ROV_DSS

感ROV_FORTEZZA

感ROV_MS_MAIL

dwFlags

[in] The flag values. This parameter is normally set to zero, but some applications will set one (and only one) of the following flags:

CRYPT_VERIFYCONTEXT

If this flag is set, then the application will have no access to the key container's private keys. In fact, if pszContainer is NULL and no default key container is present, the application will have no access to a key container at all.

This option is intended to be used by applications whose only cryptographic need is to verify digital signatures. The only operations normally needed in this case are public key import, hashing, and signature verification.

When CryptAcquireContext is called, many CSPs will require input from the owning user before granting access to the private keys in the key container. For example, the private keys may be encrypted, requiring a password from the user before they can be used. However, if the CRYPT_VERIFYCONTEXT flag is specified, access to the private keys is not required and the user interface can be bypassed.

CRYPT_NEWKEYSET

If this flag is set, then a new key container will be created with the name specified by pszContainer. If pszContainer is NULL, then a key container with the default name will be created.

Note That when key containers are created, most CSPs will not automatically create any public/private key pairs. These keys must be created as a separate step with the CryptGenKey function.

Important This flag should only be set by administrative applications. Normal applications should not create key containers.

CRYPT_DELETEKEYSET

If this flag is set, then the key container specified by pszContainer is deleted. If pszContainer is NULL, then the key container with the default name is deleted. All key pairs in the key container are also destroyed.

When the CRYPT_DELETEKEYSET flag is set, the value returned in phProv is undefined and, thus, the CryptReleaseContext function need not be called afterwards.

Important This flag should only be set by administrative applications. Normal applications should not destroy key containers.

Return Values

If the function succeeds, the return value is nonzero.

If the function fails, the return value is zero. To retrieve extended error information, use the GetLastError function.

The following table lists the error codes most commonly returned by the GetLastError function.

Error Description
ERROR_INVALID_PARAMETER One of the parameters contains an invalid value. This is most often an illegal pointer.
ERROR_NOT_ENOUGH_MEMORY The operating system ran out of memory during the operation.
NTE_BAD_FLAGS The dwFlags parameter has an illegal value.
NTE_BAD_KEYSET The Registry entry for the key container could not be opened and may not exist.
NTE_BAD_KEYSET_PARAM The pszContainer or pszProvider parameter is set to an illegal value.
NTE_BAD_PROV_TYPE The value of the dwProvType parameter is out of range. All provider types must be from 1 to 999, inclusive.
NTE_BAD_SIGNATURE The provider DLL signature did not verify correctly. Either the DLL or the digital signature has been tampered with.
NTE_EXISTS The dwFlags parameter is CRYPT_NEWKEYSET, but the key container already exists.
NTE_KEYSET_ENTRY_BAD The Registry entry for the pszContainer key container was found (in the HKEY_CURRENT_USER window), but is corrupt. See the section System Administration for details about CryptoAPI's Registry usage.
NTE_KEYSET_NOT_DEF No Registry entry exists in the HKEY_CURRENT_USER window for the key container specified by pszContainer.
NTE_NO_MEMORY The CSP ran out of memory during the operation.
NTE_PROV_DLL_NOT_FOUND The provider DLL file does not exist or is not on the current path.
NTE_PROV_TYPE_ENTRY_BAD The Registry entry for the provider type specified by dwProvType is corrupt. This error may relate to either the user default CSP list or the machine default CSP list. See the section System Administration for details about CryptoAPI's Registry usage.
NTE_PROV_TYPE_NO_MATCH The provider type specified by dwProvType does not match the provider type found in the Registry. Note that this error can only occur when pszProvider specifies an actual CSP name.
NTE_PROV_TYPE_NOT_DEF No Registry entry exists for the provider type specified by dwProvType.
NTE_PROVIDER_DLL_FAIL The provider DLL file could not be loaded, and may not exist. If it exists, then the file is not a valid DLL.
NTE_SIGNATURE_FILE_BAD An error occurred while loading the DLL file image, prior to verifying its signature.

Example

#include <wincrypt.h>

HCRYPTPROV hProv = 0;

BYTE pbData[1000];

DWORD dwDataLen;

// Get handle to the default PROV_RSA_FULL provider.

if(!CryptAcquireContext(&hProv, NULL, NULL, PROV_RSA_FULL, 0)) {

printf("Error %x during CryptAcquireContext!\n", GetLastError());

return;

}

// Read the name of the default CSP.

dwDataLen = 1000;

if(!CryptGetProvParam(hProv, PP_NAME, pbData, &dwDataLen, 0)) {

printf("Error %x reading CSP name!\n", GetLastError());

return;

}

printf("Provider name:%s\n", pbData);

// Read the name of the default key container.

dwDataLen = 1000;

if(!CryptGetProvParam(hProv, PP_CONTAINER, pbData, &dwDataLen, 0)) {

printf("Error %x reading key container name!\n", GetLastError());

return;

}

printf("Key Container name:%s\n", pbData);

// Perform cryptographic operations.

...

// Release provider handle.

if(!CryptReleaseContext(hProv, 0)) {

printf("Error %x during CryptReleaseContext!\n", GetLastError());

return;

}

// ****************************************************************

// Get handle to the Microsoft RSA Base Provider and the

// "Foo" key container.

if(!CryptAcquireContext(&hProv, TEXT("Foo"), MS_DEF_PROV,

PROV_RSA_FULL, 0)) {

printf("Error %x during CryptAcquireContext!\n", GetLastError());

return;

}

// Perform cryptographic operations.

...

// Release provider handle.

if(!CryptReleaseContext(hProv, 0)) {

printf("Error %x during CryptReleaseContext!\n", GetLastError());

return;

}

// ****************************************************************

// Get handle to the default provider. Create a new key container

// named "Bar". Note that this key container will be empty until keys

// are explicitly created with the CryptGenKey function.

lstrcpy(szProv, );

lstrcpy(szContainer, );

if(!CryptAcquireContext(&hProv, TEXT("Bar"), NULL, PROV_RSA_FULL,

CRYPT_NEWKEYSET)) {

printf("Error %x during CryptAcquireContext!\n", GetLastError());

return;

}

// Perform cryptographic operations.

...

// Release provider handle.

if(!CryptReleaseContext(hProv, 0)) {

printf("Error %x during CryptReleaseContext!\n", GetLastError());

return;

}

See Also

CryptGenKey, CryptGetProvParam, CryptReleaseContext