To connect two or more 5K monitors, you need at least two supported Quadro cards.
Select your application:
Connection Rules
Connect DP1 and DP2 from each 5K monitor to two DisplayPort connectors on each Quadro card. Do not connect DP1 to one Quadro card and DP2 to another Quadro card.
If the Quadro card has more than two DisplayPort connectors, then you can connect the 5K monitor to any two DisplayPort connectors on the card.
DP1 and DP2 from each 5K monitor must be connected to the same connector positions on each Quadro card.
For example:
DP1 is connected to connector 1 and DP2 is connected to connector 2 on the master SLI GPU.
The same connections must be made for the remaining SLI GPUs.
NOTE: Images are for illustrative
purposes, and may not match your particular card.
Configuration |
Mosaic, Clone, Extended Mode Notes |
2-way SLI
|
You can connect a maximum of two 5K monitors and configure them in 2-way Mosaic mode.
Clone/Extended Mode Clone or extended mode with non-5k monitors can be enabled only with displays connected to the master SLI GPU. |
3-way SLI
|
You can connect a maximum of three 5K monitors and configure them in 3-way Mosaic mode.
Clone/Extended Mode Clone or extended mode with non-5k monitors can be enabled only with displays connected to the master SLI GPU.
|
4-way SLI
|
You can connect a maximum of four 5K monitors and configure them in 4-way Mosaic mode. 4-way Mosaic is limited to the following topologies: - 2x2 (landscape or portrait) - 4x1 (landscape only) - 1x4 (portrait only)
Clone/Extended Mode Clone or extended mode with non-5k monitors can be enabled only with displays connected to the master SLI GPU.
|
Back to Connecting 5K Monitors to Quadro GPUs
Connection Rules
Connect DP1 and DP2 from each 5K monitor to two DisplayPort connectors on each Quadro card. Do not connect DP1 to one Quadro card and DP2 to another Quadro card.
If the Quadro card has more than two DisplayPort connectors, then you can connect the 5K monitor to any two DisplayPort connectors on the card.
NOTE: Images
are for illustrative purposes, and may not match your particular card.
Configuration |
Notes |
Two GPUs
|
Supports a maximum of two 5K monitors. Connect each monitor to the ports on the same GPU. Clone Mode To configure with a non-5K monitor in clone mode, connect the second display to the same GPU as the 5K monitor. Extended Mode To configure with a non-5K monitor in extended mode, connect the second display to any GPU. |
Three GPUs
|
Supports a maximum of three 5K monitors. Connect each monitor to the ports on the same GPU. Clone Mode To configure with a non-5K monitor in clone mode, connect the second display to the same GPU as the 5K monitor. Extended Mode To configure with a non-5K monitor in extended mode, connect the second display to any GPU. |
Four GPUs
|
Supports a maximum of four 5K monitors. Connect each monitor to the ports on the same GPU. Clone Mode To configure with a non-5K monitor in clone mode, connect the second display to the same GPU as the 5K monitor. Extended Mode To configure with a non-5K monitor in extended mode, connect the second display to any GPU. |
Back to Connecting 5K Monitors to Quadro GPUs
