These connection instructions apply to Quadro K series workstation solutions with 2 DisplayPort 1.2 connectors.
Select your application:
Connect DP1 and DP2 from the 5K monitor to two DisplayPort connectors on the Quadro card.
NOTE: Images are for illustrative purposes, and may not match your particular card.
Configuration |
Notes |
Single GPU |
You can configure the 5K monitor with a non-5K monitor in extended or clone mode. |
Back to Connecting 5K monitors to Quadro GPUs
Connect DP1 and DP2 from the 5K monitor to the two DisplayPort connectors on the master SLI GPU.
NOTE: Images are for illustrative purposes, and may not match your particular card.
Configuration |
Notes |
2-way SLI
|
Connect the 5K monitor to the master SLI GPU.
Clone/Extended Mode To configure with a non-5K monitor in clone or extended mode, connect the second display to the master SLI GPU.
|
3-way SLI
|
|
4-way SLI
|
Back to Connecting 5K monitors to Quadro GPUs
Connect DP1 and DP2 from the 5K monitor to the two DisplayPort connectors on any single Quadro card. Do not connect DP1 to one Quadro card and DP2 to another Quadro card.
NOTE: Images are for illustrative purposes, and may not match your particular card.
Configuration |
Notes |
Two Quadro Cards
|
Connect the 5K monitor to any card.
Clone Mode To configure with a non-5K monitor in clone mode, connect the second display to the same GPU as the 5K monitor. Extended Mode To configure with a non-5K monitor in extended mode, connect the second display to any GPU.
|
Three Quadro Cards
|
|
Four Quadro Cards
|
Back to Connecting 5K monitors to Quadro GPUs