This section provides illustrations and instructions for connecting to the SDI and external sync connectors on later NVIDIA Quadro FX SDI cards.
Connect one end of the DVI cable to the DVI connector on the SDI Output card and the other end to the "north" DVI connector on the NVIDIA Quadro FX 4600/5600 card as shown. The SDI output will not work if the cable is not connected to these two connectors.
Connect your display to the DVI connector indicated:
Connect one end of the DVI cable to the DVI connector on the SDI Output card and the other end to the DVI connector on the NVIDIA Quadro FX card as shown. The SDI output will not work if the cable is not connected to these two connectors.
Connect your display to the one of the connectors indicated:
Connect one end of the DVI cable to the DVI connector on the SDI Output card and the other end to the DVI connector on the NVIDIA Quadro FX card as shown. The SDI output will not work if the cable is not connected to these two connectors.
Connect your display to one of the connectors indicated:
Connect one end of the DVI cable to the DVI connector on the SDI Output card and the other end to the DVI connector on the NVIDIA Quadro FX card as shown. The SDI output will not work if the cable is not connected to these two connectors.
Connect your display to one of the connectors indicated:
The BNC connector locations for the house sync input and SDI output are shown in the figure below, with corresponding descriptions in the following table. The order of the connector descriptions in the table follow the same left-to-right order of the connectors in the figure.
|
INPUT |
KEY |
FILL |
|
SDI/Composite sync signal input |
Fill portion of a single link SDI output, or Key portion of a dual link SDI output
|
Fill portion of a single link SDI output, or Fill portion of a dual link SDI output |