Add a Flip Parameter

Up a level to ..

Add a Visibility Parameter

 

Create and Modify Objects > Create and Use Blocks (Symbols) > Add Dynamic Behavior to Blocks > Add Actions and Parameters to Dynamic Blocks > Add Action Parameters to Dynamic Blocks > 

Add an Alignment Parameter

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To add an alignment parameter to a dynamic block definition

1. Click Insert tab Block panel Block Editor. At the Command prompt, enter bedit.
2. Click Block Editor tab Action Parameter panel Alignment.In the Block Editor, in the Block Authoring Palettes window, Parameters tab, click the Alignment Parameter tool.
3. Follow the Command prompts to specify the parameter type.
4. Specify the base point of the alignment parameter.

   This base point is the default location for the alignment parameter grip.

5. (Optional) Enter type at the Command prompt and follow the prompts to specify whether the parameter type is perpendicular or tangent.
6. Specify the alignment direction.
7. Click Block Editor tab Open/Save panel Save Block. At the Command prompt, enter bsave.
8. If you are finished using the Block Editor, click Close Block Editor.

 Toolbar: Standard 

 Command entry: BPARAMETER