Create Solid-Filled Areas

Up a level to ..

Create Solid-Filled Areas

 

Annotate Drawings > Hatches, Fills, and Wipeouts > Choose Hatch Patterns and Solid Fills > 

Create Solid-Filled Areas

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To create a hatch with a solid pattern

1. Click Home tabDraw panelHatch. At the command prompt, enter hatch.
2. In the Hatch and Gradient dialog box, click Add: Pick points.
3. Specify a point in your drawing inside each area that you want hatched.

   This point is known as the internal point.

4. Press ENTER.
5. In the Hatch and Gradient dialog box, Hatch , under Type, click Predefined.
6. Click the [...] button next to Pattern.
7. In the Hatch Pattern Palette dialog box, Other Predefined , select Solid. Click OK.
8. To see how the hatch pattern will look, click Preview.
9. When you finish previewing the hatch pattern, right-click or press ENTER to apply the hatch, or press any other button or key to return to the Hatch and Gradient dialog box.
10. In the Hatch and Gradient dialog box, make adjustments, if necessary. (You can specify new hatch boundaries by clicking Add Boundaries or Remove Boundaries.)
11. Click OK.

 Toolbar: Draw 

 Command entry: HATCH