Create Solid-Filled Areas

Up a level to ..

Create Solid-Filled Areas

 

Annotate Drawings > Hatches, Fills, and Wipeouts > Choose Hatch Patterns and Solid Fills > 

Create Solid-Filled Areas

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To create a 2D solid object

1. Click Draw menuModelingMeshes2D Solid.At the command prompt, enter solid.
2. Specify the first point.
3. Specify the second point, moving left to right.
4. Continue to specify points. Press ENTER when the object is complete.

   When you create a quadrilateral solid-filled area, the sequence of the third and fourth points determines its shape. Compare the following illustrations:

   

   Notice that to create the quadrilateral area, both the top and bottom edges are specified from left to right. If you specify the first point on the right and the second point on the left, then the third and fourth points should also be in a right-to-left direction. As you continue to specify pairs of points, be sure to continue this zigzag sequence to ensure the results you expect.

 Command entry: SOLID