Specify Value Sets for Dynamic Blocks

Up a level to ..

Specify Value Sets for Dynamic Blocks

 

Create and Modify Objects > Create and Use Blocks (Symbols) > Add Dynamic Behavior to Blocks > Specify Custom Properties for Dynamic Blocks > 

Specify Value Sets for Dynamic Blocks

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To specify a value set for a rotation parameter

1. Ensure that the Properties palette is displayed. If not, click Tools menuPalettesProperties.At the Command prompt, enter properties.
2. Click Insert tab Block panel Block Editor. At the Command prompt, enter bedit.
3. In the Block Editor, select a rotation parameter.
4. In the Properties palette, under Value Set, click Ang Type.
5. On the drop-down list, select List.
6. In the Properties palette, under Value Set, click Ang Value List.
7. Click the [...] button.
8. In the Add Angle Value dialog box, under Angle to Add, enter one value or two or more values separated by commas.
9. Click Add.
10. Click OK.
11. Click Block Editor tab Open/Save panel Save Block. At the Command prompt, enter bsave.
12. (Optional) If you are finished using the Block Editor, click Close Block Editor.

 Toolbar: Standard 

 Command entry: PROPERTIES