Overview of Specifying Custom Properties for Dynamic Blocks

Up a level to ..

Overview of Specifying Custom Properties for Dynamic Blocks

 

Create and Modify Objects > Create and Use Blocks (Symbols) > Add Dynamic Behavior to Blocks > Specify Custom Properties for Dynamic Blocks > 

Overview of Specifying Custom Properties for Dynamic Blocks

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To specify the display of custom properties in a dynamic block reference

1. Ensure that the Properties palette is displayed. If not, click Tools menuPalettesProperties.At the Command prompt, enter properties.
2. Click Insert tab Block panel Block Editor. At the Command prompt, enter bedit.
3. In the Block Editor, select a parameter.
4. In the Properties palette, under Misc., click Show Properties.
5. On the drop-down list, do one of the following:
   • Select Yes to display custom properties for the block reference.
   • Select No to specify that the custom properties will not display for a block reference.
6. Click Block Editor tab Open/Save panel Save Block. At the Command prompt, enter bsave.
7. (Optional) If you are finished using the Block Editor, click Close Block Editor.

 Toolbar: Standard 

 Command entry: PROPERTIES