Overview of Specifying Custom Properties for Dynamic Blocks

Up a level to ..

Specify Value Sets for Dynamic Blocks

 

Create and Modify Objects > Create and Use Blocks (Symbols) > Add Dynamic Behavior to Blocks > Specify Custom Properties for Dynamic Blocks > 

Overview of Specifying Custom Properties for Dynamic Blocks

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To prevent non-uniform scaling in dynamic block reference

1. Use one of the following procedures to open a block definition in the Block Editor:
   • To open an existing block definition in the Block Editor
   • To open a drawing file saved as a block (not dynamic) in the Block Editor
   • To open a drawing file saved as a dynamic block in the Block Editor
2. Click Insert tab Block panel Block Editor. At the Command prompt, enter bedit.
3. In the Block Editor, make sure nothing is selected.
4. In the Properties palette, under Block, click Scale Uniformly.
5. On the drop-down list, select Yes.
6. Click Block Editor tab Open/Save panel Save Block. At the Command prompt, enter bsave.
7. (Optional) If you are finished using the Block Editor, click Close Block Editor.

 Toolbar: Standard 

 Command entry: BEDIT