Specify Grips for Dynamic Blocks

Up a level to ..

Use Lookup Tables to Assign Data to Dynamic Blocks

 

Create and Modify Objects > Create and Use Blocks (Symbols) > Add Dynamic Behavior to Blocks > Add Actions and Parameters to Dynamic Blocks > 

Specify Grips for Dynamic Blocks

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To modify the insertion cycling order for custom grips in a dynamic block reference

1. Click Insert tab Block panel Block Editor. At the Command prompt, enter bedit.
2. In the Block Editor, enter bcycleorder at the Command prompt.
3. In the Insertion Cycling Order dialog box, select a grip from the list, and click Move Up or Move Down. (A check mark in the Cycling column indicates that cycling is turned on for the grip.)
4. Repeat step 2 until you are finished modifying the grip cycling order.
5. Click OK.
6. Click Block Editor tab Open/Save panel Save Block. At the Command prompt, enter bsave.
7. (Optional) If you are finished using the Block Editor, click Close Block Editor.