Add a Stretch Action

Up a level to ..

Add a Rotate Action

 

Create and Modify Objects > Create and Use Blocks (Symbols) > Add Dynamic Behavior to Blocks > Add Actions and Parameters to Dynamic Blocks > Add Actions to Dynamic Blocks > 

Add a Polar Stretch Action

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To add a polar stretch action to a block definition

1. Click Insert tab Block panel Block Editor. At the Command prompt, enter bedit.
2. In the Block Editor, in the Block Authoring Palettes window, Actions tab, click the Stretch Action tool.
3. In the Block Editor drawing area, select a polar parameter to associate with the action. (You can associate only a polar parameter with a polar stretch action.)
4. Select a parameter point to associate with the action.
5. Specify the first corner of the stretch frame.
6. Specify the opposite corner of the stretch frame.
7. Select the objects to stretch or move. Press Enter.
8. Select the objects that you want to rotate. Press Enter.
9. (Optional) Follow the Command prompts to specify distance and offset.
10. Specify the location of the action.
    NoteThe action location in the block definition has no effect on the appearance or functionality of the block reference.
11. Click Block Editor tab Open/Save panel Save Block. At the Command prompt, enter bsave.
12. If you are finished using the Block Editor, click Close Block Editor.

 Toolbar: Standard 

 Command entry: BACTION