Add Actions and Parameters to Dynamic Blocks

Up a level to ..

Add Action Parameters to Dynamic Blocks

 

Create and Modify Objects > Create and Use Blocks (Symbols) > Add Dynamic Behavior to Blocks > Add Actions and Parameters to Dynamic Blocks > 

Overview of Actions and Parameters in Dynamic Blocks

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To create a dynamic block

1. Click Insert tab Block panel Block Editor. At the Command prompt, enter bedit.
2. In the Edit Block Definition dialog box, do one of the following:
   • Select a block definition from the list.
   • Select <Current Drawing> if you want to save the drawing as a dynamic block.
   • Under Block to Create or Edit, enter a name for a new block definition.
3. Click OK.
4. In the Block Editor, add or edit geometry as necessary.
5. Do one of the following:
   • Add one or more parameter sets from the Parameter Sets tab of the Block Authoring Palettes, following the Command prompts. Double-click the yellow alert icon (or use the BACTIONSET command) and follow the Command prompts to associate the action with a selection set of geometry.
   • Add one or more parameters from the Parameters tab of the Block Authoring Palettes, following the Command prompts. Add one or more actions from the Actions tab, following the Command prompts.
6. Click Block Editor tab Open/Save panel Save Block. At the Command prompt, enter bsave.
7. Click Close Block Editor.

 Toolbar: Standard 

 Command entry: BEDIT