Change the UCS with ViewCube

Up a level to ..

Navigate with SteeringWheels

 

Control the Drawing Views > Use Viewing Tools > Use ViewCube > 

Change the UCS with ViewCube

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To set the orientation of the ViewCube tool based on the current UCS or WCS

1. Click View tab Views panel ViewCube. At the Command prompt, enter navvcube.
2. Right-click the ViewCube tool and click ViewCube Settings.
3. In the ViewCube Settings dialog box, select Orient ViewCube to Current UCS.

   The ViewCube tool aligns with the current UCS.

4. Click OK.

 Command entry: NAVVCUBE