| ID | Name | Meaning |
|---|---|---|
| 1 | Site No. | Number of the site where the faulty board or module is located Value range: 0-2047 |
| 2 | Board Type | Number of the type which the faulty board belongs to. 147:PBU |
| 3 | Board No. | Number of the fault board 0:PBU 0 |
| 4 | PassNo | Number of the passage where the faulty board is located. |
| 5 | SubLink No. | Alarm sub-category number 255:None |
| 6 | Cell Index | Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None |
| 7 | Site Type | Type of the site where the faulty board or module is located 3: BTS30 5: BTS312 10: BTS3012A 11: BTS3006A |
| 8 | RackNo | Number of the rack where the faulty board is located. |
| 9 | BoxNo | Number of the subrack where the faulty board is located. |
| 10 | SlotNo | Number of the slot where the faulty board is located. |
| 11 | Site Name | Site Name |
| 12 | Alarm Attribute | Alarm Character 0:Normal 1:Transient Count |
This alarm indicates that the master clock of the PBU fails. In this case, the system starts the standby clock system if any, thus having no impact upon the services.
View the TMU clock state.
If internal clock occurs, replace the TMU. View whether the alarm is cleared.
Y=> The alarm handling ends.
N=> Go to Step 2.
If no internal clock occurs, Go to Step 2.
Replace the TDU and check whether the alarm is cleared.
Y=> The alarm handling ends.
N=> Go to Step 3.
Replace the PBU and check whether the alarm is cleared.
Y=> The alarm handling ends.
N=> Please contact Huawei Customer Service Center. The alarm may be caused by cable distribution failure.