Configuring the PTPBVC

This describes how to add a PTPBVC on the Gb interface to bind the GPRS cell with the NSE.

Scenario	BSC initial configuration and BSC capacity expansion
Mandatory/Optional	Optional. The PTPBVC is configured only when the BSC is configured with a built-in PCU.

NOTE:

One GPRS cell can be configured with only one PTPBVC. One NSE can be configured with multiple PTPBVCs.

Prerequisites

Procedure

1. On the BSC6000 Local Maintenance Terminal, right-click the BSC6000 root node.
2. Choose Configure PCU Data > Configure PTPBVC from the shortcut menu. A dialog box is displayed, as shown in Figure 1.
   Figure 1 Configure PTPBVC dialog box
   
   

3. Click Add. A dialog box is displayed, as shown in Figure 2.
   Figure 2 Add PTPBVC dialog box
   
   

4. Set the parameters by referring to Table 1.
5. Click OK to return to the dialog box, as shown in Figure 1.
6. Click Finish. The configuration of the PTPBVC is complete.