Configuring the 2G External Cell

This describes how to add a 2G external cell for the BSC and set the attributes of the cell.

Scenario	BSC initial configuration
Mandatory/Optional	Optional. A 2G external cell should be configured when the handover from a cell under the BSC to the 2G external cell is required.

None.

Preparation

On the BSC6000 Local Maintenance Terminal, right-click 2G External Cells.
Choose Add 2G External Cell from the shortcut menu. A dialog box is displayed, as shown in Figure 1.
Figure 1 Add 2G External Cell dialog box
Click Add ExtCell. A dialog box is displayed, as shown in Figure 2.
Figure 2 Add 2G External Cell dialog box

NOTE:
To add 2G external cells in batches, set the number of 2G external cells in .
Set the parameters by referring to Table 1.
Click OK to return to the dialog box shown in Figure 1.
Click Finish. The configuration of the 2G external cell is complete.