Querying Frequency Scan Results

• The LMT runs normally.
• The communication between the LMT and the BSC is normal.
• The Configure Frequency Scan function of the cell is enabled.

Each carrier has two RX ports: carrier main and carrier diversity. The main level indicates the uplink signal level of the main carrier and the diversity level indicates the uplink signal level of the diversity carrier.

There are two methods of querying frequency scan. The results are different if you query the frequency scan through different methods.

• Main Max , Diversity Max , Main Average and Diverse Average: The LMT can query the Main/Diversity maximum value and Main/Diversity average value in a frequency scan period, and calculate the average value of Main/Diversity level.
• Max and Average: The main level and diversity level are unstable. The maximum value and average value of the main level and diversity level can be optimized through specified algorithm. Some BTSs support the algorithm. You can view which uplink frequency scan method the BTS supports by querying the Uplink Frequency Scan Result Type. For details, refer to Querying BTS Attributes.