1. A BSC supports up to 2,048 cells.
2. A BTS supports up to 12 cells.
3. The name of a cell must be unique in a BSC and the name cannot be empty.
4. Any two cells in a BSC cannot have the same CGI.
5. When Freq. Band is set to PCS1900, you cannot configure a DCS1800 cell or a Co-BCCH cell. When Freq. Band is set to DCS1800, you cannot configure a PCS1900 cell.
6. When the TRX is configured in cabinet group 1 or 2, you need to add a slave chain or internal connection to the BTS.
7. Only the BTS3012 and the BTS3012II support combined cabinets and cabinet groups.
| ID | Name | Description |
|---|---|---|
| IDXTYPE | Index Type | Meaning:Index Type Value range:BYNAME(By Name),BYIDX(By Index) Explanation: Index Type. Default value:None |
| BTSIDX | BTS Index | Meaning:BTS Index Value range:0~2047 Explanation:This parameter specifies the index number of a BTS. Each BTS is numbered uniquely in a BSC. Default value:None |
| BTSNAME | BTS Name | Meaning:BTS Name Value range:1-32 characters Explanation:This parameter specifies the name of a BTS. The name of each BTS is unique in a BSC. Excluding the invalid characters ';',',','"','''','=','\','%%','+++','&','#'. Default value:None |
| CELLIDX | Cell Index | Meaning:Cell Index Value range:0~2047 Explanation: This parameter indicates the source cell index. The source cell index must be unique. Default value:None |
| CELLNAME | Cell Name | Meaning:Cell Name Value range:1-32 characters Explanation: This parameter indicates the name of the source cell. The name of each cell under one BSC must be unique. Default value:None |
| CTYPE | Freq. Band | Meaning:Freq. Band Value range:GSM900,DCS1800,GSM900_DCS1800,GSM850,PCS1900,GSM850_1800,GSM850_1900 Explanation: This parameter specifies the frequency band of new cells. Each new cell can be allocated frequencies of only one frequency band. Once the frequency band is selected, it cannot be changed. GSM900: The cell supports GSM900 frequency band. DCS1800: The cell supports DCS1800 frequency band. GSM900 and DCS1800: The cell supports GSM900 and DCS1800 frequency bands. GSM850: The cell supports GSM850 frequency band. GSM850 and DCS1800: The cell supports GSM850 and DCS1800 frequency bands. PCS1900: The cell supports PCS1900 frequency band. GSM850 and PCS1900: The cell supports GSM850 and PCS1900 frequency bands. Default value:None |
| AST | Activity State | Meaning:Activity State Value range:NOT_ACTIVATED(Not activated),ACTIVATED(Activated) Explanation:This parameter specifies the activation status of a cell. The activation status can be Not Activated or Activated. Default value:None |
| MCC | MCC | Meaning:MCC Value range:000-999 Explanation: This parameter specifies the mobile country code (MCC), for example, the MCC of China is 460. Default value:None |
| MNC | MNC | Meaning:MNC Value range:00-999 Explanation: This parameter specifies the mobile network code (MNC). Default value:None |
| LAC | LAC | Meaning:LAC Value range:1~65533,65535 Explanation:This parameter specifies the local area code (LAC). An MS can move randomly in the local location area and location update is not required. Appropriate segmentation of location areas has a significant impact on the balancing of signaling load and on the increase in the put-through rate. Default value:None |
| CI | CI | Meaning:CI Value range:0~65535 Explanation: This parameter specifies the identity of a cell. A cell is radio coverage area identified by base station identity code (BSIC) and cell global identification (CGI). Appropriate segmentation of cells has a significant impact on the balancing of signaling load and on the increase in the put-through rate. Default value:None |
| TRXIDX | TRX index | Meaning:TRX index Value range:0~2047 Explanation:This parameter specifies the unique index number of each TRX in a BSC. Default value:None |
| TRXBN | TRX Board No. | Meaning:TRX Board No. Value range:0~71 Explanation:This parameter specifies the unique number of each board type in a site. Default value:None |
| TRXTP | TRX Board Type | Meaning:TRX Board Type Value range:TRX(TRX),TRU(TRU/DTRU),QTRU(QTRU),DRRU(DRRU),DRFU(DRFU),MRRU(MRRU),MRFU(MRFU),GRFU(GRFU),GRRU(GRRU),BTS3900B(BTS3900B),BTS3900E(BTS3900E) Explanation:This parameter is used to differentiate boards with unique identifiers in the BTS. Default value:None |
| TRXPN1 | TRX Board Pass No. | Meaning:TRX Board Pass No. Value range:0~1 Explanation:Number of a TRX on uplink tributary 0 Value 255 indicates that no TRX is connected. Default value:None |
| TRXPN2 | TRX Board Pass No. | Meaning:TRX Board Pass No. Value range:0~7 Explanation:Number of a TRX on uplink tributary 0 Value 255 indicates that no TRX is connected. Default value:None |
| TRXNO | Logic TRX No. | Meaning:Logic TRX No. Value range:0~71 Explanation:This parameter specifies the TRX number, which must be unique in one BTS. The following two points should be paid attention to: 1. If the logical TRX is not separated from the physical board, This parameter specifies the TRX number in a cabinet. For such BTSs as the BTS3012II and BTS3002E, the TRX numbers may be discontinuous. 2. If the logical TRX is separated from the physical board, one-to-one mapping between them is not mandatory. Default value:None |
| TRXFREQ | TRX Freq | Meaning:TRX Freq Value range:0~1023 Explanation:None. Default value:None |
| NEEDCHAIN | Need Add Slave Chain OR Inn Connect | Meaning:Need Add Slave Chain OR Inn Connect Value range:NO(DONNOT NEED INN OR CHAIN),SLAVE_CHAIN_BSC(NEED SLAVE CHAIN),SLAVE_CHAIN_SITE(NEED SLAVE CHAIN),INN_CONNECT(NEED INN CONNECT) Explanation:Need Add Slave Chain OR Inn Connect. Default value:None |
| OUTPN | BTS Out Port No. | Meaning:BTS Out Port No. Value range:0~7 Explanation:None. Default value:None |
| INPN | BTS In Port No. | Meaning:BTS In Port No. Value range:1~23 Explanation:None. Default value:None |
| SRN | Subrack No. | Meaning:Subrack No. Value range:0~11 Explanation:None. Default value:None |
| SN | Slot No. | Meaning:Slot No. Value range:0~27 Explanation:None. Default value:None |
| PN | Port No. | Meaning:Port No. Value range:0~83 Explanation:None. Default value:None |
| FPN | Dest Father BTS Port No. | Meaning:Dest Father BTS Port No. Value range:0~31 Explanation:None. Default value:None |
| COMCAB | Need Mixed Combination Cabinet | Meaning:Need Mixed Combination Cabinet Value range:NO(No),YES(YES) Explanation:Is Mixed Combine Cabinet. Default value:None |
| CNT | Cabinet Type | Meaning:Cabinet Type Value range:BTS30,BTS312,BTS3012,BTS3012_II Explanation:This parameter indicates the cabinet type used as mixed combine cabinet. Default value:None |
| RXUNAME | RXU Name | Meaning:RXU Name Value range:1-32 characters Explanation:This parameter specifies the name of the RXU. Each RXU is named uniquely in a BTS. Default value:None |
| RXUCHAINNO | RXU Chain No. | Meaning:RXU Chain No. Value range:0~11 Explanation:This parameter specifies the number of the RXU chain. One BTS is configured with up to 12 RXU chains, and the chain number of a BTS is unique. Default value:None |
| RXUCHAINNO1 | RXU Chain No. | Meaning:RXU Chain No. Value range:0~11 Explanation:This parameter specifies the number of an RXU chain in the BTS. Default value:None |
| RXUCHAINHEADPN | RXU Chain Head Port No. | Meaning:RXU Chain Head Port No. Value range:0~5 Explanation:RXU Chain Head Port No. Default value:None |
| RXUCHAINHEADPN1 | RXU Chain Head Port No. | Meaning:RXU Chain Head Port No. Value range:0~1 Explanation:RXU Chain Head Port No. Default value:None |
| INSERTPOS | Insert RXU Position | Meaning:Insert RXU Position Value range:0~6 Explanation:Insert Position. Default value:None |
| TRXPN3 | TRX Board Pass No. | Meaning:TRX Board Pass No. Value range:0~1 Explanation:Number of a TRX on uplink tributary 0 Value 255 indicates that no TRX is connected. Default value:None |
| ANTPASSNO | Antenna Pass No | Meaning:Antenna Pass No Value range:A(A),B(B) Explanation: This parameter indicates the anntenna pass No. Default value:None |
| TRXPN4 | TRX Board Pass No. | Meaning:TRX Board Pass No. Value range:0~1 Explanation:None. Default value:None |
| TRXHDLCNOINBTS | TRXHDLCNoInBTS | Meaning:TRXHDLCNoInBTS Value range:1~15 Explanation: This parameter specifies the number of the HDLC path in a BTS. Default value:None |
| ISRFUCFGBYSLOT | Cfg RFU by Slot | Meaning:Cfg RFU by Slot range:YES(YES),NO(NO) Explanation: 1. This parameter specifies whether to configure the DRFU, MRFU, GRFU, or XRFU by slot or link. 2. When setting the BTS to support the configuration of the RFU by slot, set this parameter to "YES". When setting the BTS not to support the configuration of the RFU by slot, set this parameter to "NO". 3. If this parameter is set to "YES", you must enter the numbers of the subrack and slot where the new board is located. If you need to specify the CPRI connection relations (SFP port number and cascading level) based on a rule that is different from the cabinet mapping rule specified by the system, the parameters "RXU Chain Head Port No." and "Insert RXU Position" must be specified. If this parameter is set to "NO", you must set "TRX Board No.", "RFU Link No." and "RXU Chain Head Port No.". Default value:None |
| RFUSUBRANKNO | RFU Subrack No. | Meaning:Insert RFU Subrack No. Value range:0~17 Explanation:Subrack No. of RFU Board. Default value:None |
| RFUSLOTNO | RFU Slot No. | Meaning:RFU Board Slot No Value range:0~23 Explanation:RFU board slot No. Default value:None |
| RFUCHAINNO | RXU Link No. | Meaning:RXU Link No. Value range:0~11 Explanation:This parameter specifies the number of the RXU chain. One BTS is configured with up to 12 RXU chains, and the chain number of a BTS is unique. Default value:None |
| RFUCHAINHEADPN | RXU Chain Head Port No. | Meaning:RXU Chain Head Port No. Value range:0~5 Explanation:RXU Chain Head Port No. Default value:None |
| RFUINSERTPOS | Insert RXU Position | Meaning:Insert RXU Position Value range:0~7 Explanation:Insert Position. Default value:None |
| RFUCHAINNO1 | RXU Link No. | Meaning:RXU Link No. Value range:0~11 Explanation:This parameter specifies the number of the RXU chain. One BTS is configured with up to 12 RXU chains, and the chain number of a BTS is unique. Default value:None |
| RFUCHAINHEADPN1 | RXU Chain Head Port No. | Meaning:RXU Chain Head Port No. Value range:0~5 Explanation:RXU Chain Head Port No. Default value:None |
| RFUINSERTPOS1 | Insert RXU Position | Meaning:Insert RXU Position Value range:0~7 Explanation:Insert Position. Default value:None |
Add a 2G internal cell (BTS Index = 0; Cell Name = cell3; MCC = 460; MNC = 10; LAC = 12; CI = 14; TRX Board No. = 53; TRX Board Type = QTRU(QTRU); TRX Board Pass No. = 1; TRX Freq = 64; Need Add Slave Chain OR Inn Connect = INN_CONNECT(NEED INN CONNECTION); BTS Out Port No. = 3; BTS In Port No. = 16): ADD CELL: IDXTYPE=BYIDX, BTSIDX=0, CELLNAME="cell3", CTYPE=GSM900, AST=ACTIVATED, MCC="460", MNC="10", LAC=12, CI=14, TRXBN=53, TRXTP=QTRU, TRXPN2=1, TRXFREQ=64, NEEDCHAIN=INN_CONNECT, OUTPN=3, INPN=16;