Add M3UA Route(ADD M3RT)

Function

A configuration command that adds an M3UA route.

Note

1. Before running this command, ensure that the corresponding M3UA link set and M3UA destination entity exist.

2. A destination entity can be reached through three different link sets.

3. The destination entity that does not use the STP for transmission must use its own link set for transmission; the destination entity that uses the STP for transmission must use the link set of the signaling transfer entity for transmission.

4. The signaling transfer entity must use its own link set for transmission.

Parameters

ID	Name	Description
DENO	Destination Entity No.	Meaning:Destination Entity No. Value range:0~288 Explanation: This parameter specifies the index of the system entity. This index is unique. Default value:None
SIGLKSIDX	Signalling Link Set Index	Meaning:Signalling Link Set Index Value range:0~128 Explanation: This parameter specifies the index of the link set. This index is unique. Default value:None

Name

Description

DENO

Destination Entity No.

Meaning:Destination Entity No.

Value range:0~288

Explanation: This parameter specifies the index of the system entity. This index is unique.

Default value:None

SIGLKSIDX

Signalling Link Set Index

Meaning:Signalling Link Set Index

Value range:0~128

Explanation: This parameter specifies the index of the link set. This index is unique.

Default value:None

Example

Add an M3UA route (Destination Entity No. = 0; Signaling Link Set Index = 0):
ADD M3RT: DENO=0, SIGLKSIDX=0;