A configuration command that modifies the AMR call control parameters of a cell. In this command, the following parameters uniquely identify the cell:
Cell Index or Cell Name
When the parameter Auto Adjust UL Threshold and Hysteresis [F] is set to YES(YES), the following parameters are invalid: AMR UL Coding Rate adj.th1[F], AMR UL Coding Rate adj.th2[F], AMR UL Coding Rate adj.th3[F], AMR UL Coding Rate adj.hyst1[F], AMR UL Coding Rate adj.hyst2[F], AMR UL Coding Rate adj.hyst3[F]. When the parameter Auto Adjust UL Threshold and Hysteresis [H] is set to YES(YES), the following parameters are invalid: AMR UL Coding Rate adj.th1[H], AMR UL Coding Rate adj.th2[H], AMR UL Coding Rate adj.th3[H], AMR UL Coding Rate adj.hyst1[H], AMR UL Coding Rate adj.hyst2[H], AMR UL Coding Rate adj.hyst3[H].
| ID | Name | Description |
|---|---|---|
| IDXTYPE | Index Type | Meaning:Index Type Value range:BYNAME(By Name),BYIDX(By Index) Explanation:Index Type. Default value:None |
| CELLIDX | Cell Index | Meaning:Cell Index Value range:0~2047 Explanation: This parameter indicates the source cell index. The source cell index must be unique. Default value:None |
| CELLNAME | Cell Name | Meaning:Cell Name Value range:1-32 characters Explanation: This parameter indicates the name of the source cell. The name of each cell under one BSC must be unique. Default value:None |
| RATECTRLSW | AMR rate control switch | Meaning:AMR rate control switch Value range:ALG1(Algorithm I),ALG2(Algorithm II),NONE(None) Explanation:This parameter specifies whether AMR rate adaptation algorithm is enabled and which algorithm should be used for codec mode adjustment. Default value:None |
| ACTCDSETF | AMR ACS[F] | Meaning:AMR ACS[F] Value range:4_75Kbps(0),5_15Kbps(1),5_90Kbps(2),6_70Kbps(3),7_40Kbps(4),7_95Kbps(5),10_2Kbps(6),12_2Kbps(7) Explanation:This parameter specifies the set of active coding rates. The active coding set (ACS) is a set of coding rates currently available for calls. Use a BIT map to present the speech coding rates contained in the ACS, wherein a BIT corresponds to a coding rate. If a bit is 1, the coding rate is included in the ACS. Otherwise, the ACS does not include the coding rate. The value of this parameter has eight bits. Default value:None |
| AUTOADJULTHHYSTF | Auto Adjust UL Threshold and Hysteresis [F] | Meaning:Auto Adjust UL Threshold and Hysteresis [F] Value range:NO(NO),YES(YES) Explanation:This parameter specifies whether a full-rate AMR call can automatically adjust the uplink rate threshold and hysteresis. Default value:None |
| ULTHF1 | AMR UL Coding Rate adj.th1[F] | Meaning:AMR UL Coding Rate adj.th1[F] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| ULTHF2 | AMR UL Coding Rate adj.th2[F] | Meaning:AMR UL Coding Rate adj.th2[F] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| ULTHF3 | AMR UL Coding Rate adj.th3[F] | Meaning:AMR UL Coding Rate adj.th3[F] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| ULHYSTF1 | AMR UL Coding Rate adj.hyst1[F] | Meaning:AMR UL Coding Rate adj.hyst1[F] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| ULHYSTF2 | AMR UL Coding Rate adj.hyst2[F] | Meaning:AMR UL Coding Rate adj.hyst2[F] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| ULHYSTF3 | AMR UL Coding Rate adj.hyst3[F] | Meaning:AMR UL Coding Rate adj.hyst3[F] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLTHF1 | AMR DL Coding Rate adj.th1[F] | Meaning:AMR DL Coding Rate adj.th1[F] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLTHF2 | AMR DL Coding Rate adj.th2[F] | Meaning:AMR DL Coding Rate adj.th2[F] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLTHF3 | AMR DL Coding Rate adj.th3[F] | Meaning:AMR DL Coding Rate adj.th3[F] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLHYSTF1 | AMR DL Coding Rate adj.hyst1[F] | Meaning:AMR DL Coding Rate adj.hyst1[F] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLHYSTF2 | AMR DL Coding Rate adj.hyst2[F] | Meaning:AMR DL Coding Rate adj.hyst2[F] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLHYSTF3 | AMR DL Coding Rate adj.hyst3[F] | Meaning:AMR DL Coding Rate adj.hyst3[F] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| INITCDMDF | AMR Starting Mode[F] | Meaning:AMR Starting Mode[F] Value range:0~3 Explanation:This parameter specifies the coding rate adopted on a full-rate channel when a call is initially established. Since there are at most four coding rates in the ACS, this field have four values 0, 1, 2, and 3, representing the lowest, low, high, and highest coding rates in the ACS respectively. Default value:None |
| ACTCDSETH | AMR ACS[H] | Meaning:AMR ACS[H] Value range:4_75Kbps(0),5_15Kbps(1),5_90Kbps(2),6_70Kbps(3),7_40Kbps(4),7_95Kbps(5) Explanation:This parameter specifies the set of active coding rates. The active coding set (ACS) is a set of coding rates currently available for calls. Use a BIT map to present the speech coding rates contained in the ACS, wherein a BIT corresponds to a coding rate. If a bit is 1, the coding rate is included in the ACS. Otherwise, the ACS does not include the coding rate. The value of this parameter has five bits. Default value:None |
| AUTOADJULTHHYSTH | Auto Adjust UL Threshold and Hysteresis [H] | Meaning:Auto Adjust UL Threshold and Hysteresis [H] Value range:NO(NO),YES(YES) Explanation:This parameter specifies whether a half-rate AMR call can automatically adjust the uplink rate threshold and hysteresis. Default value:None |
| ULTHH1 | AMR UL Coding Rate adj.th1[H] | Meaning:AMR UL Coding Rate adj.th1[H] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| ULTHH2 | AMR UL Coding Rate adj.th2[H] | Meaning:AMR UL Coding Rate adj.th2[H] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| ULTHH3 | AMR UL Coding Rate adj.th3[H] | Meaning:AMR UL Coding Rate adj.th3[H] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| ULHYSTH1 | AMR UL Coding Rate adj.hyst1[H] | Meaning:AMR UL Coding Rate adj.hyst1[H] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| ULHYSTH2 | AMR UL Coding Rate adj.hyst2[H] | Meaning:AMR UL Coding Rate adj.hyst2[H] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| ULHYSTH3 | AMR UL Coding Rate adj.hyst3[H] | Meaning:AMR UL Coding Rate adj.hyst3[H] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLTHH1 | AMR DL Coding Rate adj.th1[H] | Meaning:AMR DL Coding Rate adj.th1[H] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLTHH2 | AMR DL Coding Rate adj.th2[H] | Meaning:AMR DL Coding Rate adj.th2[H] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLTHH3 | AMR DL Coding Rate adj.th3[H] | Meaning:AMR DL Coding Rate adj.th3[H] Value range:0~63 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLHYSTH1 | AMR DL Coding Rate adj.hyst1[H] | Meaning:AMR DL Coding Rate adj.hyst1[H] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLHYSTH2 | AMR DL Coding Rate adj.hyst2[H] | Meaning:AMR DL Coding Rate adj.hyst2[H] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| DLHYSTH3 | AMR DL Coding Rate adj.hyst3[H] | Meaning:AMR DL Coding Rate adj.hyst3[H] Value range:0~15 Explanation:Based on the RQI in the call measurement report, the BTS and MS automatically adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carrier-to-interference ratio (CIR) of the call. If RQI equals 1, the CIR is 0.5 dB; if RQI equals 2, the CIR is 1 dB; and so forth. Since there are multiple coding rates in the ACS, there is an adjustment threshold and an adjustment hysteresis between the neighboring coding rates. Default value:None |
| INITCDMDH | AMR Starting Mode[H] | Meaning:AMR Starting Mode[H] Value range:0~3 Explanation:This parameter specifies the coding rate adopted on a half-rate channel when a call is initially established. Since there are at most four coding rates in the ACS, this field have four values 0, 1, 2, and 3, representing the lowest, low, high, and highest coding rates in the ACS respectively. Default value:None |
| AMRTFOSWITCH | AMR TFO Switch | Meaning:AMR TFO Switch Value range:DISABLE(DISABLE),ENABLE(ENABLE) Explanation:The BSC informs a BTS whether to enable the AMR TFO function through a CHANNEL ACTIVATION or MODE MODIFY message. Default value:None |
| AMRUADTHAW | AMR Uplink Adaptive Threshold Allowed | Meaning:AMR Uplink Adaptive Threshold Allowed Value range:NO(NO),YES(YES) Explanation:None. Default value:None |
| LTFERUPTH | Long-term FER Upper Threshold | Meaning:Long-term FER Upper Threshold Value range:2~255 Explanation:None. Default value:None |
| LTFERLOWTH | Long-term FER Lower Threshold | Meaning:Long-term FER Lower Threshold Value range:2~255 Explanation:None. Default value:None |
| LTFERTGT | Long-term FER Target | Meaning:Long-term FER Target Value range:2~255 Explanation:None. Default value:None |
| LTTHADJFA | Threshold Adjust Factor | Meaning:Threshold Adjust Factor Value range:2~255 Explanation:None. Default value:None |