A configuration command that modifies the 2G BA2 of the handover parameters of the cell. In this command, Cell Index or Cell Name uniquely identifies a cell.
When "Support High Frequency Band" is set to "PCS1900", the frequency range in the BA table cannot be 811-885.
To ensure that the frequencies in the BA table are correctly encoded, some frequencies in the table should be restricted by rules. The set of these frequencies are called the rule-restricted frequency set.
The way of obtaining the rule-restricted frequency set varies with the types of frequency bands in the cell.
1. When "Support High Frequency Band" is set to "DCS1800":
If the frequency range of the BCCH is 1-124, the range of the frequencies in the rule-restricted frequency set is 0, 128-251, 512-885, and 955-1023.
If the frequency range of the BCCH is 0 or 975-1023, the range of the frequencies in the rule-restricted frequency set is 128-251, 512-885, and 955-974.
If the frequency range of the BCCH is 955-974, the range of the frequencies in the rule-restricted frequency set is 128-251 and 512-885.
In other cases, the rule-restricted frequency set is null.
2. When "Support High Frequency Band" is set to "PCS1900":
If the frequency range of the BCCH is 1-124, the range of the frequencies in the rule-restricted frequency set is 0, 128-251, 512-810, and 955-1023.
If the frequency range of the BCCH is 0, 975-1023, the range of the frequencies in the rule-restricted frequency set is 128-251, 512-810, and 955-974.
If the frequency range of the BCCH is 955-974, the range of the frequencies in the rule-restricted frequency set is 128-251 and 512-810.
In other cases, the rule-restricted frequency set is null.
In the case of a co-BCCH cell, the rule-restricted frequency set is divided into four sets according to the types of the frequency bands (GSM900, DCS1800, GSM850, and PCS1900). Each set is verified based on the following rules. All frequencies in the BA table can be correctly encoded only when all the four sets comply with the rules.
In the case of a non co-BCCH cell, all frequencies in the BA table can be correctly encoded when the rule-restricted frequency set complies with the following rules.
The rules are as follows:
Sort the frequencies in the frequency set in an ascending order. If the set complies with one of the following rules, the frequencies can be correctly encoded.
1. Any ARFCN is between 0 and 124.
2. The difference between the maximum ARFCN and the minimum ARFCN is smaller than or equal to 111.
3. In the case of the sorted frequency set, the difference between any adjacent frequencies is greater than or equal to 913.
4. The number of frequencies in a set is smaller than or equal to 16.
5. The number of frequencies in a set is 17 and the frequency [0] is contained in the set.
6. The number of frequencies in a set is smaller than or equal to 18 and the difference between any adjacent frequencies is greater than 512. (Note: The maximum ARFCN and the minimum ARFCN are also adjacent. The formula for calculating their difference is: 1024 - maximum ARFCN + minimum ARFCN. The formulas for calculating the difference between the maximum ARFCN and the minimum ARFCN in rules 7 and 8 are the same.)
7. The number of frequencies in a set should be smaller than or equal to 22. In addition, the difference between two adjacent frequencies should be greater than 768.
8. The number of frequencies in a set should be smaller than or equal to 29. In addition, the difference between two adjacent frequencies should be greater than 896.
| ID | Name | Description |
|---|---|---|
| IDXTYPE | Index Type | Meaning:Index Type Value range:BYNAME(By Name),BYIDX(By Index) Explanation:Index Type. Default value:None |
| CELLIDX | Cell Index | Meaning:Cell Index Value range:0~2047 Explanation: This parameter indicates the source cell index. The source cell index must be unique. Default value:None |
| CELLNAME | Cell Name | Meaning:Cell Name Value range:1-32 characters Explanation: This parameter indicates the name of the source cell. The name of each cell under one BSC must be unique. Default value:None |
| 2GBA2TAG | 2GBA2 Input Tag | Meaning:2GBA2 Input Tag Value range:AUTO(Auto),MANU(Manu) Explanation:This parameter specifies whether manually entering information in the BA table is allowed. Default value:None |
| 2GBCCH1 | 2G NCELL BCCH 1 | Meaning:2G NCELL BCCH 1 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH2 | 2G NCELL BCCH 2 | Meaning:2G NCELL BCCH 2 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH3 | 2G NCELL BCCH 3 | Meaning:2G NCELL BCCH 3 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH4 | 2G NCELL BCCH 4 | Meaning:2G NCELL BCCH 4 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH5 | 2G NCELL BCCH 5 | Meaning:2G NCELL BCCH 5 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH6 | 2G NCELL BCCH 6 | Meaning:2G NCELL BCCH 6 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH7 | 2G NCELL BCCH 7 | Meaning:2G NCELL BCCH 7 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH8 | 2G NCELL BCCH 8 | Meaning:2G NCELL BCCH 8 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH9 | 2G NCELL BCCH 9 | Meaning:2G NCELL BCCH 9 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH10 | 2G NCELL BCCH 10 | Meaning:2G NCELL BCCH 10 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH11 | 2G NCELL BCCH 11 | Meaning:2G NCELL BCCH 11 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH12 | 2G NCELL BCCH 12 | Meaning:2G NCELL BCCH 12 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH13 | 2G NCELL BCCH 13 | Meaning:2G NCELL BCCH 13 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH14 | 2G NCELL BCCH 14 | Meaning:2G NCELL BCCH 14 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH15 | 2G NCELL BCCH 15 | Meaning:2G NCELL BCCH 15 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH16 | 2G NCELL BCCH 16 | Meaning:2G NCELL BCCH 16 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH17 | 2G NCELL BCCH 17 | Meaning:2G NCELL BCCH 17 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH18 | 2G NCELL BCCH 18 | Meaning:2G NCELL BCCH 18 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH19 | 2G NCELL BCCH 19 | Meaning:2G NCELL BCCH 19 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH20 | 2G NCELL BCCH 20 | Meaning:2G NCELL BCCH 20 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH21 | 2G NCELL BCCH 21 | Meaning:2G NCELL BCCH 21 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH22 | 2G NCELL BCCH 22 | Meaning:2G NCELL BCCH 22 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH23 | 2G NCELL BCCH 23 | Meaning:2G NCELL BCCH 23 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH24 | 2G NCELL BCCH 24 | Meaning:2G NCELL BCCH 24 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH25 | 2G NCELL BCCH 25 | Meaning:2G NCELL BCCH 25 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH26 | 2G NCELL BCCH 26 | Meaning:2G NCELL BCCH 26 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH27 | 2G NCELL BCCH 27 | Meaning:2G NCELL BCCH 27 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH28 | 2G NCELL BCCH 28 | Meaning:2G NCELL BCCH 28 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH29 | 2G NCELL BCCH 29 | Meaning:2G NCELL BCCH 29 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH30 | 2G NCELL BCCH 30 | Meaning:2G NCELL BCCH 30 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH31 | 2G NCELL BCCH 31 | Meaning:2G NCELL BCCH 31 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH32 | 2G NCELL BCCH 32 | Meaning:2G NCELL BCCH 32 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH33 | 2G NCELL BCCH 33 | Meaning:2G NCELL BCCH 33 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH34 | 2G NCELL BCCH 34 | Meaning:2G NCELL BCCH 34 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH35 | 2G NCELL BCCH 35 | Meaning:2G NCELL BCCH 35 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH36 | 2G NCELL BCCH 36 | Meaning:2G NCELL BCCH 36 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH37 | 2G NCELL BCCH 37 | Meaning:2G NCELL BCCH 37 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH38 | 2G NCELL BCCH 38 | Meaning:2G NCELL BCCH 38 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH39 | 2G NCELL BCCH 39 | Meaning:2G NCELL BCCH 39 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH40 | 2G NCELL BCCH 40 | Meaning:2G NCELL BCCH 40 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH41 | 2G NCELL BCCH 41 | Meaning:2G NCELL BCCH 41 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH42 | 2G NCELL BCCH 42 | Meaning:2G NCELL BCCH 42 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH43 | 2G NCELL BCCH 43 | Meaning:2G NCELL BCCH 43 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH44 | 2G NCELL BCCH 44 | Meaning:2G NCELL BCCH 44 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH45 | 2G NCELL BCCH 45 | Meaning:2G NCELL BCCH 45 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH46 | 2G NCELL BCCH 46 | Meaning:2G NCELL BCCH 46 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH47 | 2G NCELL BCCH 47 | Meaning:2G NCELL BCCH 47 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH48 | 2G NCELL BCCH 48 | Meaning:2G NCELL BCCH 48 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH49 | 2G NCELL BCCH 49 | Meaning:2G NCELL BCCH 49 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH50 | 2G NCELL BCCH 50 | Meaning:2G NCELL BCCH 50 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH51 | 2G NCELL BCCH 51 | Meaning:2G NCELL BCCH 51 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH52 | 2G NCELL BCCH 52 | Meaning:2G NCELL BCCH 52 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH53 | 2G NCELL BCCH 53 | Meaning:2G NCELL BCCH 53 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH54 | 2G NCELL BCCH 54 | Meaning:2G NCELL BCCH 54 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH55 | 2G NCELL BCCH 55 | Meaning:2G NCELL BCCH 55 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH56 | 2G NCELL BCCH 56 | Meaning:2G NCELL BCCH 56 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH57 | 2G NCELL BCCH 57 | Meaning:2G NCELL BCCH 57 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH58 | 2G NCELL BCCH 58 | Meaning:2G NCELL BCCH 58 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH59 | 2G NCELL BCCH 59 | Meaning:2G NCELL BCCH 59 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH60 | 2G NCELL BCCH 60 | Meaning:2G NCELL BCCH 60 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH61 | 2G NCELL BCCH 61 | Meaning:2G NCELL BCCH 61 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH62 | 2G NCELL BCCH 62 | Meaning:2G NCELL BCCH 62 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH63 | 2G NCELL BCCH 63 | Meaning:2G NCELL BCCH 63 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |
| 2GBCCH64 | 2G NCELL BCCH 64 | Meaning:2G NCELL BCCH 64 Value range:0~1023 Explanation:This parameter specifies the frequencies of the neighbor 2G cells of a cell. The frequencies of the added neighbor 2G cells are listed in 2G Cell BA Table 2 in sequence and are sent in the system information message. Default value:None |