A configuration command that modifies the UTRAN FDD handover parameters of the cell. In this command, Cell Index or Cell Name uniquely identifies a cell.
| ID | Name | Description |
|---|---|---|
| IDXTYPE | Index type | Meaning:Index type Value range:BYNAME(By Name),BYIDX(By Index) Explanation:Index Type. Default value:None |
| CELLIDX | Cell index | Meaning:Cell index Value range:0~2047 Explanation: This parameter indicates the number of the cell. Each cell is numbered uniquely in a BSC. Default value:None |
| CELLNAME | Cell name | Meaning:Cell name Value range:1-32 characters Explanation: This parameter indicates the name of the cell. Each cell is named uniquely in a BSC. Default value:None |
| BET3GHOEN | Better 3g cell ho allowed | Meaning:Better 3g cell ho allowed Value range:NO(NO),YES(YES) Explanation: This parameter specifies whether the 3G better cell handover algorithm is allowed. Yes: The 3G better cell handover algorithm is allowed. No: The 3G better cell handover algorithm is forbidden. Default value:None |
| HOOPTSEL | Inter-rat ho preference | Meaning:Inter-rat ho preference Value range:Pre_2G_Cell(Preference for 2G Cell),Pre_3G_Cell(Preference for 3G Cell),Pre_2G_CellThres(Preference 2G Cell By Thresh) Explanation: This parameter specifies whether an MS is preferentially handed over to a 2G cell or to a 3G cell. Default value:None |
| 2GHOPRETH | Ho preference threshold for 2g cell | Meaning:Ho preference threshold for 2g cell Value range:0~63 Explanation: If the Inter-RAT HO Preference parameter is set to Preference for 2G Cell By Threshold, and if the receive level of the first candidate cell among 2G candidate cells is lower than or equal to the HO Preference Threshold for 2G Cell, the 3G cell handover is preferred. Otherwise, the 2G cell handover is preferred. The level values 0 through 63 map to -110 dBm to -47 dBm. Default value:None |
| 3GHORSCPTH | Rscp threshold for better 3g cell ho | Meaning:Rscp threshold for better 3g cell ho Value range:0~63 Explanation: If both Inter-RAT Out BSC Handover Enable and Better 3G Cell HO Allowed are set to Yes, a 3G better cell handover is triggered when the RSCP of an adjacent 3G cell is greater than RSCP Threshold for Better 3G Cell HO during a period of time. The level values 0 through 63 map to -115 dBm to -25 dBm. Default value:None |
| 3GHOECNOTH | Ec/no threshold for better 3g cell ho | Meaning:Ec/no threshold for better 3g cell ho Value range:0~49 Explanation: If both Inter-RAT Out BSC Handover Enable and Better 3G Cell HO Allowed are set to Yes, a 3G better cell handover is triggered when the Ec/No of an adjacent 3G cell is greater than Ec/No Threshold for Better 3G Cell HO during a period of time. The level values 0 to 49 map to -24 dB to 0 dB. Default value:None |
| 3GHOSTAT | 3g better cell ho watch time[s] | Meaning:3g better cell ho watch time[s] Value range:1~16 Explanation: According to the P/N criterion, if the triggering conditions of 3G better cell handover are met for N consecutive seconds within P seconds, a 3G better cell handover is triggered. This parameter corresponds to P of the P/N criterion. Default value:None |
| 3GHODURT | 3g better cell ho valid time[s] | Meaning:3g better cell ho valid time[s] Value range:1~16 Explanation: According to the P/N criterion, if the triggering conditions of 3G better cell handover are met for N consecutive seconds within P seconds, a 3G better cell handover is triggered. This parameter corresponds to N of the P/N criterion. Default value:None |