A configuration command that modifies the LCS parameters of the cell. In this command, Cell Index or Cell Name uniquely identifies a cell.
| ID | Name | Description |
|---|---|---|
| IDXTYPE | Index Type | Meaning:Index Type Value range:BYNAME(By Name),BYIDX(By Index) Explanation: Index Type. Default value:None |
| CELLIDX | Cell Index | Meaning:Cell Index Value range:0~2047 Explanation: This parameter indicates the source cell index. The source cell index must be unique. Default value:None |
| CELLNAME | Cell Name | Meaning:Cell Name Value range:1-32 characters Explanation: This parameter indicates the name of the source cell. The name of each cell under one BSC must be unique. Default value:None |
| INPUTMD | Latitude and Longitude input mode | Meaning:Latitude and Longitude input mode Value range:Degree(degree),D_min_sec(degree minute second) Explanation:This parameter specifies the input type of the longitude and latitude where a cell is located. The input type can be either degree or multi-degree. Default value:None |
| NSLATI | NS Latitude | Meaning:NS Latitude Value range:North_latitude(North latitude),South_latitude(South latitude) Explanation:This parameter specifies whether the cell location is latitude north or latitude south. Default value:None |
| LATIINT | Integer of Latitude | Meaning:Integer of Latitude Value range:0~90 Explanation:This parameter specifies the integer part of the latitude where a cell is located. The input type of latitude is degree. Default value:None |
| LATIDECI | Fraction of Latitude | Meaning:Fraction of Latitude Value range:1-5 characters Explanation:This parameter specifies the fraction part of the latitude where a cell is located. The input type of latitude is degree. Default value:None |
| WELONGI | WE Longitude | Meaning:WE Longitude Value range:East_Longitude(East Longitude),West_Longitude(West Longitude) Explanation:This parameter specifies whether the cell location is longitude east or longitude west. Default value:None |
| LONGIINT | Integer of Longitude | Meaning:Integer of Longitude Value range:0~180 Explanation:This parameter specifies the integer part of the longitude where a cell is located. The input type of longitude is degree. Default value:None |
| LONGIDECI | Fraction of Longitude | Meaning:Fraction of Longitude Value range:1-5 characters Explanation:This parameter specifies the fraction part of the longitude where a cell is located. The input type of longitude is degree. Default value:None |
| LATIDEGREE | Degree of Latitude | Meaning:Degree of Latitude Value range:0~90 Explanation:This parameter specifies the degree of the latitude where a cell is located. The input type of latitude is multi-degree. Default value:None |
| LATIMINUTE | Minute of Latitude | Meaning:Minute of Latitude Value range:0~59 Explanation:This parameter specifies the minute of the latitude where a cell is located. The input type of latitude is multi-degree. Default value:None |
| LATISECONDINT | Integer of Latitude Seconds | Meaning:Integer of Latitude Seconds Value range:0~59 Explanation:This parameter specifies the integer part of the second of the latitude where a cell is located. The input type of latitude is multi-degree. Default value:None |
| LATISECONDDECI | Fraction of Latitude Seconds | Meaning:Fraction of Latitude Seconds Value range:0~9 Explanation:This parameter specifies the fraction part of the second of the latitude where a cell is located. The input type of latitude is multi-degree. Default value:None |
| LONGIDEGREE | Degree of Longitude | Meaning:Degree of Longitude Value range:0~180 Explanation:This parameter specifies the degree of the longitude where a cell is located. The input type of longitude is multi-degree. Default value:None |
| LONGIMINUTE | Minute of Longitude | Meaning:Minute of Longitude Value range:0~59 Explanation:This parameter specifies the minute of the longitude where a cell is located. The input type of longitude is multi-degree. Default value:None |
| LONGISECONDINT | Integer of Longitude Seconds | Meaning:Integer of Longitude Seconds Value range:0~59 Explanation:This parameter specifies the integer part of the second of the longitude where a cell is located. The input type of longitude is multi-degree. Default value:None |
| LONGISECONDDECI | Fraction of Longitude Seconds | Meaning:Fraction of Longitude Seconds Value range:0~9 Explanation:This parameter specifies the fraction part of the second of the longitude where a cell is located. The input type of longitude is multi-degree. Default value:None |
| ANTAANGLE | Antenna Azimuth Angle[degree] | Meaning:Antenna Azimuth Angle[degree] Value range:0~360 Explanation:This parameter is calculated according to the Included Angle and the actual Antenna Azimuth Angle. The Included Angle refers to the coverage area of the cell. Antenna Azimuth Angle = actual Antenna Azimuth Angle - Included Angle/2. Default value:None |
| INCLUDEANG | Included Angle[degree] | Meaning:Included Angle[degree] Value range:0~360 Explanation:This parameter specifies the included angle formed by the major lobe azimuth of the antennas in two cells under one BTS. The major lobe azimuth is measured from the north to the direction of the cell antenna in a clockwise direction. Default value:None |
| ALTITUDE | Integer of Antenna Altitude[m] | Meaning:Integer of Antenna Altitude[m] Value range:0~6553 Explanation:This parameter specifies the integer part of the altitude of the cell antenna. Default value:None |
| ALTIDECI | Fraction of Antenna Altitude | Meaning:Fraction of Antenna Altitude Value range:0~9 Explanation:Fraction of Antenna Altitude. Default value:None |