A configuration command that modifies the parameters of the destination entity. In this command, Destination Entity No. uniquely identifies a destination entity.
| ID | Name | Description |
|---|---|---|
| DENO | Destination Entity No. | Meaning:Destination Entity No. Value range:0~288 Explanation: This parameter specifies the index of the system entity. This index is unique. Default value:None |
| NAME | New Destination Entity Name | Meaning:New Destination Entity Name Value range:1-49 characters Explanation: This parameter specifies the destination entity name, which helps the user record and identify the entity. The names of different M3UA destination entities should be unique. Default value:None |
| RTCONTEXT | Routing context | Meaning:Routing context Value range:0~4294967295 Explanation: This parameter uniquely identifies one link route. Default value:None |
| SSN | Subsystem Number | Meaning:Subsystem Number Value range:143,254 Explanation:This parameter specifies the subsystem number of the SCCP. The value 143 specifies inter-BSC communication, and 254 specifies the BSSAP. Default value:None |
| MSCCAP | MSC Available Capability[Thousand] | Meaning:MSC Available Capability[Thousand] Value range:0~65535 Explanation: This parameter specifies the maximum number of users that the MSC supports when the MSC Pool function is enabled. Default value:None |
| MNC | MNC | Meaning:MNC Value range:00-999 Explanation: This parameter specifies the mobile network code (MNC). Default value:None |
| CNID | Network Element ID | Meaning:Network Element ID Value range:0~4095 Explanation: This parameter specifies the MSC ID distributed by the core network operators. Default value:None |
| MSCSTATUE | MSC Administrable State | Meaning:MSC Administrable State Value range:OFFLOAD(Offload),NORMAL(Normal),UNAVAIL(Unavailable) Explanation: This parameter specifies the MSC administration state on the BSC side. The MSC can receive incoming calls only when it is normal. Default value:None |
| DFDPC | Default DPC | Meaning:Default DPC Value range:NO(No Default DPC),YES(Default DPC) Explanation: When this parameter is set to Yes, all the calls that are allocated to the BSC can only access the system through MSCs with this DSP R if the MSC Pool is not activated. When this parameter is set to No, no calls that are allocated to the BSC can access the system through MSCs with this DSP R if the MSC Pool is not activated.This parameter is invalid when the MSC POOL is activated. Default value:None |
| BSSLSMSCCOOPSW | BSS Loop Switch MSC Cooperate Switch | Meaning:BSS Loop Switch MSC Cooperate Switch Value range:CLOSE(Close),OPEN(Open) Explanation: When this parameter is set to Open, the decision on whether the MSC allows the user to perform local switching should be made before local switching is enabled. Otherwise, the decision is not made. The assignment request carries the flag about whether the MSC allows the user to perform local switching. Default value:None |