A configuration command that modifies the parameters of the IP address of a physical port. In this command, the following parameters uniquely identify an IP address of a physical port:
Subrack No.
Slot No.
Port No.
1. This command applies to only the GFGUA/GOGUA/GFGUB/GOGUB/GFGUG.
2. The number of a GE port on the GFGUA/GFGUB/GFGUG can only be 0 or 4; the number on the GOGUA/GOGUB can only be 0 or 1.
3. The IP addresses of physical ports must have been added.
4. The IP addresses of physical ports must be different from the IP addresses that have been configured.
5. The IP addresses of different physical ports and IP addresses of boards cannot be located in the same network segment. The IP addresses of the two ports must not in the inclusion network segment.
6. The port IP address and the destination IP address in the BSC route cannot be on the same network segment. If they are on the same network segment, the destination IP address is invalid.
7. Modifying the IP address of the physical port may disrupt services.
| ID | Name | Description |
|---|---|---|
| SRN | Subrack No. | Meaning:Subrack No. Value range:0~11 Explanation: This parameter specifies the subrack number of an IP-based interface board. Default value:None |
| SN | Slot No. | Meaning:Slot No. Value range:0~27 Explanation: This parameter specifies the slot number of an IP-based interface board. Default value:None |
| PORT | Port No. | Meaning:Port No. Value range:0~7 Explanation: This parameter specifies the port number of an IP-based interface board. Default value:None |
| IPINDEX | IP address index | Meaning:IP address index Value range:0~5 Explanation: This parameter specifies the IP address index. A maximum of six IP addresses can be configured for one port. Default value:None |
| IPADDR | IP address | Meaning:IP address Value range:0.0.0.0-255.255.255.255 Explanation: This parameter specifies the port IP address of an IP-based interface board, which is also called as physical IP address. Default value:None |
| MASK | Subnet mask | Meaning:Subnet mask Value range:0.0.0.0-255.255.255.255 Explanation: This parameter specifies the network mask of port IP address on the IP-based interface board. Default value:None |
| IPADDR2 | Standby IP address | Meaning:Standby IP address Value range:0.0.0.0-255.255.255.255 Explanation: This parameter specifies the port IP address of the standby IP interface board when the IP interface boards are configured in active/standby mode. Default value:None |